The steps below are for PIXMA MG3020 and MG3022 printers. Get instructions for other printer models.
Follow these steps from the operation panel of the printer.
-
Turn the printer ON.
-
Load two sheets of A4 or Letter-sized plain paper.
-
Press and hold the Wi-Fi® button and release it when Wi-Fi lamp flashes.
-
Press the Color button.
-
Press the Wi-Fi button twice.
-
Press the Color or Black button.
Network information similar to what you see below prints out. (Some setting values may not display depending on the printer settings.)
The network settings printout contains important information about your network. Handle it with care.
Sample printout
Item | Description | Setting |
---|
Product Information | Product information | – |
Product Name | Product name | XXXXXXXX |
ROM Version | ROM version | XXXXXXXX |
Serial Number | Serial number | XXXXXXXX |
Wireless LAN | Wireless LAN | Enable/Disable |
WPS PIN CODE | WPS PIN code | XXXXXXXX |
Infrastructure | Infrastructure | Enable/Disable |
MAC Address | MAC address | XX:XX:XX:XX:XX:XX |
Connection | Connection status | Active/Inactive |
SSID | Wireless network name | Wireless network name |
Channel | Channel | XX (1 to 11) |
Encryption | Encryption method | None/WEP/TKIP/AES |
WEP Key Length | WEP key length (bits) | Inactive/128/64 |
Authentication | Authentication method | None/auto/open/shared/WPA-PSK/WPA2-PSK |
Signal Strength | Signal strength | 0 to 100 [%] |
TCP/IPv4 | TCP/IPv4 | Enable |
IP Address | IP address | XXX.XXX.XXX.XXX |
Subnet Mask | Subnet mask | XXX.XXX.XXX.XXX |
Default Gateway | Default gateway | XXX.XXX.XXX.XXX |
TCP/IPv6 | TCP/IPv6 | Enable/Disable |
Link Local Address | Link local address | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Link Local Prefix Length | Link local prefix length | XXX |
Stateless Address1 | Stateless address 1 | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Stateless Prefix Length1 | Stateless prefix length 1 | XXX |
Stateless Address2 | Stateless address 2 | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Stateless Prefix Length2 | Stateless prefix length 2 | XXX |
Stateless Address3 | Stateless address 3 | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Stateless Prefix Length3 | Stateless prefix length 3 | XXX |
Stateless Address4 | Stateless address 4 | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Stateless Prefix Length4 | Stateless prefix length 4 | XXX |
Default Gateway1 | Default gateway 1 | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Default Gateway2 | Default gateway 2 | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Default Gateway3 | Default gateway 3 | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Default Gateway4 | Default gateway 4 | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
IPsec | IPsec setting | Active |
Security Protocol | Security method | ESP/ESP & AH/AH |
Access Point Mode | Access Point Mode / Wireless Direct | Enable/Disable |
MAC Address | MAC address | XX:XX:XX:XX:XX:XX |
Connection | Connection status | Active/Inactive |
SSID | Wireless Direct network name | Wireless Direct network name |
Password | Password | Wireless Direct password (10 alphanumeric characters) |
Channel | Channel | 3 |
Encryption | Encryption method | AES |
Authentication | Authentication method | WPA2-PSK |
TCP/IPv4 | TCP/IPv4 | Enable |
IP Address | IP address | XXX.XXX.XXX.XXX |
Subnet Mask | Subnet mask | XXX.XXX.XXX.XXX |
Default Gateway | Default gateway | XXX.XXX.XXX.XXX |
TCP/IPv6 | TCP/IPv6 | Enable/Disable |
Link Local Address | Link local address | XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX |
Link Local Prefix Length | Link local prefix length | XXX |
IPsec | IPsec setting | Active |
Security Protocol | Security method | – |
Other Settings | Other settings | – |
Printer Name | Printer name | Printer name (Up to 15 alphanumeric characters) |
WSD Printing | WSD printing setting | Enable/Disable |
WSD Timeout | Timeout | 1/5/10/15/20 [min] |
LPD Printing | LPD printing setting | Enable/Disable |
RAW Printing | RAW printing setting | Enable/Disable |
Bonjour | Bonjour setting | Enable/Disable |
Bonjour Service Name | Bonjour service name | Bonjour service name (Up to 52 alphanumeric characters) |
LLMNR | LLMNR setting | Enable/Disable |
SNMP | SNMP setting | Enable/Disable |
PictBridge Commun. | PictBridge Communication | Enable/Disable |
DNS Server | Obtain DNS server address automatically | Auto/Manual |
Primary Server | Primary server address | XXX.XXX.XXX.XXX |
Secondary Server | Secondary server address | XXX.XXX.XXX.XXX |
Proxy Server | Proxy server setting | Enable/Disable |
Proxy Address | Proxy address | XXXXXXXXXXXXXXXXXXXX |
Proxy Port | Proxy port specification | 1 to 65535 |
Cert. Fingerprt(SHA-1) | Certificate fingerprint(SHA-1) | XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX |
Cert. Fingerprt(SHA-256) | Certificate fingerprint(SHA-256) | XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX |
("XX" represents alphanumeric characters.)