Operation Panel
* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.
-
ON lamp
Lights after flashing when the power is turned on.
You can check the status of the machine by the ON and Alarm lamps.
-
ON lamp is off: The power is off.
-
ON lamp lights: The machine is ready to print.
-
ON lamp flashes: The machine is getting ready to print, or printing is in progress.
-
Alarm lamp flashes: An error has occurred and the machine is not ready to print.
-
ON lamp flashes and Alarm lamp flashes alternately: An error that requires contacting the service center may have occurred.
-
ON button
Turns the power on or off. Before turning on the power, make sure that the document cover is closed.
-
Wi-Fi lamp
Lights or flashes to indicate the wireless LAN status.
-
Wi-Fi button
Hold down to automatically set up the wireless LAN connection.
-
ink lamps
Light or flash when ink runs out, etc.
The left lamp indicates the color FINE cartridge status, the right lamp the black FINE cartridge status.
-
Paper button
Selects the page size and media type.
-
Paper lamp
Lights to indicate the page size and media type selected with the Paper button.
-
Stop button
Cancels operation when print, copy, or scan job is in progress.
Holding this button down lets you select maintenance options or machine settings.
-
Color button*
Starts color copying. You can also press this button to finalize your selection for the setting item.
-
Black button*
Starts black & white copying. You can also press this button to finalize your selection for the setting item.
-
Alarm lamp
Lights or flashes when an error occurs. When performing machine maintenance or machine settings, options can be selected according to the number of flashes.
* In the software applications or manuals, the Color and Black buttons are collectively called the "Start" or "OK" button.
