Message | Solution |
Need to recover files from the memory card. Change the position of the LOCK switch on the memory card. | This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch. |
No memory card | Insert a compatible memory card into the camcorder. |
No photos | There are no photos to play back. |
No scenes | There are no scenes in the memory selected. |
Not enough available space | Delete some recordings on the memory card or select the [3 Mbps] bit rate for the conversion to SD. |
Number of scenes already at maximum | The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes to free some space. |
Number of stories already at maximum | The gallery already contains the maximum number of stories (98 user-created stories in any one given memory). Delete some stories or change the recording memory for movies |
Scene recorded using another device. Cannot divide the scene. | Scenes that were not recorded with this camcorder cannot be divided with this camcorder. |
Scene recorded using another device. Cannot play back the scene. | Scenes that were not recorded with this camcorder cannot be played back.td> |
Select the desired scene number | A number of scenes have the same recording date but different file control information. This can occur, for example, when you edit movies on a computer and then transfer the files back to the camcorder. Select a number to display the corresponding group of scenes. |
Some scenes could not be converted | Some scenes selected for conversion to SD were recorded using another device. These scenes were not converted. Among the scenes selected for conversion to SD there are scenes recorded with the camcorder or another device using 24p frame rate. When converting scenes to SD, leave out scenes recorded using 24p frame rate. |
Some scenes could not be deleted | Movies that were protected/edited with other devices cannot be deleted with this camcorder. |
Some scenes were recorded using another device and cannot be copied. | Scenes that were not recorded with this camcorder cannot be copied to memory card . |
Task in progress. Do not disconnect the power source. | The camcorder is updating the memory. Wait until the operation ends and do not disconnect the compact power adapter or remove the battery pack. |
There are no scenes with the selected rating | No scenes have been rated yet. Rate the scenes as you like. The criteria you used to select scenes by rating resulted in no applicable scenes. Change the criteria used to select scenes by rating. |
This memory card contains scenes. Delete all scenes to use relay recording. | Save your movies if necessary, and delete all the movies from the memory card. |
This photo cannot be displayed | You may not be able to display photos taken with other devices or image files created or edited on a computer. |
This scene was recorded using another device and cannot be copied. | Scenes that were not recorded with this camcorder cannot be copied to memory card . |
To record video on this memory card, it is recommended to use only the XP+/SP/LP recording modes | Movies may not be recorded correctly on this memory card if the recording mode is set to MXP or FXP mode |
To use the wireless function, insert the Eye-Fi card into slot B. | You may have inserted the Eye-Fi card into memory card slot A. Insert it into memory card slot B. |
To use this function change the camcorder's mode from [AUTO] to M/CINEMA | CUSTOM, the CUSTOM dial and some of the functions that can be assigned to the assignable buttons cannot be used in [AUTO] mode. Set the mode switch to M (Manual mode) or CINEMA (Cinema mode) to use them. |
Too many photos. Disconnect the USB cable. | Disconnect the USB cable. Try using a memory card reader or decrease the number of photos on the memory card to fewer than 2,500 photos (Windows), or 1,000 photos (Mac OS). If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection after a short while. |
Total play time is too long | When converting scenes from a story, the maximum total playback time of the scenes to be converted is 12 hours (when converting individual scenes) or 2 hours and 30 minutes (when converting stories). Reduce the number of scenes to be converted to SD. |
Unable to recognize the data | You transferred data to the camcorder recorded using a video configuration that is not supported (PAL or SECAM). Play back the recordings with the device originally used to record them. |
Unable to recover data | Could not recover a corrupted file. Save your recordings and initialize the memory using the [Complete Initialization] option. |
Unsupported gallery data detected. Cannot record or edit. Delete gallery data? | The gallery data of the movies in the selected memory card is not supported. The movies can be played back but you cannot edit them or record additional scenes to this gallery. Select [Yes] to delete the unsupported gallery data. Note that after doing so, you will not be able to play back the movies with the device originally used to record the unsupported gallery data. |