| Search Results |
 |
Using the SM-V1 microphone with compatible camcorders
|
Removing the microphone The memory card supplied with the SM-V1 can only be used to update the firmware of a compatible Canon camcorder; it cannot be initialized, nor used for recording. lf you attempt to initialize the memory card or record on it, the error message [Memory card is write-protected
|
|
|
Explanation of and use of double slot recording
|
If a memory card becomes full during double slot recording, recording on cards will stop. If an error occurs with one of the memory cards, recording will continue on the other card. During Story Creator mode double slot recording are not available.
|
|
|
Does the camcorder feature double slot recording where the same clip can be recorded to both memory cards in the memory card slots? (VIXIA HF G20 / LEGRIA HF G25)
|
If a memory card becomes full during double slot recording, recording on cards will stop. If an error occurs with one of the memory cards, recording will continue on the other card. During Story Creator mode double slot recording are not available.
|
|
|
List of error messages on a VIXIA HF10 camcorder
|
List of Messages The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the memory card with one rated Speed Class 2 or higher.. BUILT-IN MEMORY ERROR
|
|
|
Error Message VIXIA HF W10 _ HF W11
|
The clock is reset about one month after the battery is depleted. Therefore, “SET DATE/TIME!” will appear the next time the power is turned on. Set the clock again after charging the battery.
|
|
|
List of error messages on a VIXIA HF100 camcorder
|
List of Messages The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the memory card with one rated Speed Class 2 or higher.. CANNOT COMMUNICATE WITH THE BATTERY PACK CONTINUE USING THIS BATTERY PACK?
|
|
|
List of error messages on a HG10 camcorder
|
List of Messages Disconnect the USB cable and decrease the number of still images on the memory card to fewer than 1 ,800. If a dialog appeared on the computer screen, close it and then reconnect the USB cable. WHILE THE CAMCORDER IS CONNECTED TO A PC DO NOT DISCONNECT THE USB CABLE OR POWER SOURCE
|
|
|
List of Messages (VIXIA HF G30)
|
... camcorder, an error message is displayed on ... ... 59.94 P Scenes that were ... 59.94 P ), 28 ... 59.94 P ) or 35 ... 59.94 P ) cannot be ... ... AVCHD movies or 3 Mbps for MP ... ... card already contains 3 ,999 scenes ... ... /B writing error ... take up to 3 min.) ... memory card with one rated SD Speed ... ... 59.94 P ), 28 ... 59.94 P ) or 35 ... 59.94 P ), you ... ... A memory card error occurred.
|
|
|
List of Messages (VIXIA HF R62/R60/R600)
|
... -in memory error ... in memory writing error ... recorded at 60 P ... recorded at 60 P cannot be converted ... ... AVCHD scenes ( 3 ,999 scenes ... ... Cannot join 24 P and 30 P scenes to convert ... ... joined to a single scene when converted ... ... different from the one selected in the ... A memory card error occurred. File name error The file or ... ... memory card with one rated CLASS 4 ... ... AVCHD scenes ( 3 ,999 scenes ... ... Memory card writing error ... AVCHD scenes ( 3 ,999 scenes ...
|
|
|
List of Messages (VIXIA HF R72/R70/R700)
|
... in memory writing error ... recorded at 60 P • Scenes that ... recorded at 60 P cannot be converted ... ... rate is 24 P and scenes recorded ... ... AVCHD scenes ( 3 ,999 scenes ... ... Cannot join 24 P and 30 P scenes to convert ... joined to a single scene when converted ... ... different from the one selected in the ... A memory card error occurred. File name error • The file ... ... memory card with one rated CLASS 4 ... ... AVCHD scenes ( 3 ,999 scenes ... ... Memory card writing error ... AVCHD scenes ( 3 ,999 scenes ...
|
|
