| Search Results |
 |
Displaying the Status Screens XF705
|
1 Streaming video configuration and audio channels 2 Receiver settings and transfer protocol 3 Error correction settings [Network 4/6] to [Network 6/6] Status Screens (
|
|
|
Using the SM-V1 microphone with compatible camcorders
|
Removing the microphone The memory card supplied with the SM-V1 can only be used to update the firmware of a compatible Canon camcorder; it cannot be initialized, nor used for recording. lf you attempt to initialize the memory card or record on it, the error message [Memory card is write-protected
|
|
|
Using double slot recording with the XF100/105
|
If a CF card becomes full during double slot recording, recording on cards will stop. On the other hand, if an error occurs with one of the cards, recording will continue on the other card.
|
|
|
Explanation of and use of double slot recording
|
If a memory card becomes full during double slot recording, recording on cards will stop. If an error occurs with one of the memory cards, recording will continue on the other card. During Story Creator mode double slot recording are not available.
|
|
|
Does the camcorder feature double slot recording where the same clip can be recorded to both memory cards in the memory card slots? (VIXIA HF G20 / LEGRIA HF G25)
|
If a memory card becomes full during double slot recording, recording on cards will stop. If an error occurs with one of the memory cards, recording will continue on the other card. During Story Creator mode double slot recording are not available.
|
|
|
Does the camcorder feature double slot recording where the same clip can be recorded to both CF cards in the CF card slots? (XF200 / XF205)
|
If a CF card becomes full during double slot recording, recording on cards will stop. On the other hand, if an error occurs with one of the cards, recording will continue on the other card.
|
|
|
Relay Recording and Double Slot Recording XF705
|
If an SD card becomes full during double slot recording, recording on both cards will stop. On the other hand, if an error occurs with one of the SD cards, recording will continue on the other card
|
|
|
Fixing ZoomBrowser EX "corrupted database" or "E_Fail error" message for EOS D30, EOS D60, PowerShot A10, A100, A20, A200, A40, G1, G2, Pro 901S, S110, S200, S30, S300, S330, S40, ZR45mc, ZR50mc, and GL2
|
ZoomBrowser EX is giving a ?corrupted database? or ?E_Fail? error message . How can I fix this? ... _Fail" error message . ... " or EFail error message , there are ... Method 1 - Deleting and ... 1 . If it ... ... delete the following three files: xxx ... ... Usually, these three files will be ... 3 . If you ... ... corrupted database" error , proceed to ... ... \Image Library One . 1 . If it is still running, Exit ... They are usually located at C:\Program Files\Canon\ZoomBrowserEX\ Image Library One \My Images. ... 3 . Using Start ... delete the Image Library One
|
|
|
List of error messages on a VIXIA HF10 camcorder
|
List of Messages The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the memory card with one rated Speed Class 2 or higher.. BUILT-IN MEMORY ERROR
|
|
|
Try another memory card in the camera and other troubleshooting steps.
|
On Camera LCD screen displays No Memory Card, Memory Card Error, Unrecognized File Format, Incompatible JPEG, or "?" marks for images when card is inserted in the camera or while attempting to Playback images. If after formatting the card in the camera the error persists, try another memory card. If this occurs with only the one card it is likely that the memory card is defective, if the error persists over more than one card the camera may require service. If the card appears to be defective you may wish to contact the memory card manufacturer.
|
|
|
