Search Results |
|
Scanning Procedure-Mac (P-215)
To run CaptureOnTouch Lite, the [CaptureOnTouch Lite for Mac] folder and the [ONTOUCHLITE] folder must be mounted . ... If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again.
|
|
|
Scanning with CaptureOnTouch Lite - Mac
Scanning with CaptureOnTouch Lite - Mac To run CaptureOnTouch Lite, the [CaptureOnTouch Lite for Mac] folder and the [ONTOUCHLITE] folder must be mounted . ... If an error message appears due to insufficient memory while scanning is in progress, stop scanning, change the scanning conditions, and then try scanning again. ... If an error message appears due to insufficient memory while scanning is in progress, stop scanning, change the scanning conditions, and then try scanning again.
|
|
|
Error Codes for the DR-G2090, G2110, and G2140 scanners
Error [ P ***] Paper jammed in scanner Error [C***] Scanner cover is open Error [J***] Paper feed error detected Error [J***] A document was skewed Error [D***] A double paper-feed has occured Error [J*** ] Staple was detected Error [J***] Dust was detected Error [U***] The count does not match Error [E***] Scanner hardware problem
|
|
|
Selecting a Job and Scanning (P-215)
If you configure scanning conditions that consume a large amount of the computer's memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again.
|
|
|
Scanning Procedure (P-215)
If you configure scanning conditions that require a large amount of the computer’s memory, scanning may be disabled. If an error message appears due to insufficient memory while scanning is in progress, exit the application and try scanning again using different scanning condition settings.
|
|
|
Common Problems and Solutions (P-215)
A high resolution (600dpi etc.) is specified for [Dots per inch]. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions (e.g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Prevent Bleed Through / Remove Background] if they are set to on.
|
|
|
Error on computer screen: Double feed has been detected
An error appears on your computer screen stating "Double feed has been detected" when using the P -150
|
|
|
Replacing the Separation Pad (P-215)
Attach the separation pad securely until it clicks into place. If the pad is not attached completely, feeding errors may occur.
|
|
|
Function Restrictions Depending on Color Mode Setting-Mac (P-215)
Setting Value Check the image of the first page Detect automatically X Black and White ? Error Diffusion ? Advanced Text Enhancement II ?
|
|
|
Replace the rollers. (SF220/220P)
Do not use excessive force when removing or attaching the retard or feed rollers. Doing so may cause the rollers to become deformed, resulting in feed errors .
|
|