| Search Results |
 |
Recessed Mounting Kit SR600-VB - Installing the Camera
|
The following explains the procedures to install the camera on a ceiling using the recessed mounting kit . Before installing the camera, set the IP address and other network information on the camera using the “VB Initial Setting Tool” on the Setup CD-ROM.
|
|
|
Recessed Mounting Kit SR600-VB - External Dimensions
|
Recessed Mounting Kit SR 600- VB - External Dimensions
|
|
 |
Network Camera Camera Management Tool User Manual
|
... For details on error information, please ... The error information dialog box ... Open Camera Error Information Displays the error information of selected ... ... 70) Mounting /Unmounting Memory ... ... 2, an error will occur when ... ... below, an error will occur when ... ... dddd], VB -XXX, ... Connection status of the camera 0: Not connectable 1: Connectable 2: Authentication required 3: Connectable ( error ) 4: Admin Required SettingStatus Last performed operation IPv4Address IPv4 address AutoIP IPv4 address (AutoIP)
|
|
|
Installing the Camera
|
Ceiling Mounting Kit CM10- VB Dedicated accessory for attaching the camera to the ceiling. Wall Mounting kit WM10-VB
|
|
|
What the Log Viewer does in the VB-C50i / VB-C50iR software
|
Code - The log displays error codes . For error codes, refer to Log Messages Error codes are displayed with one of 4 types of icons according to level.
|
|
|
Display Screen for VB Viewer
|
(13)Information Field - Information messages, warning messages and error messages are shown to the user. (14)[Get a Snapshot] button - A still image from the moment of clicking is displayed in a new window. (15)
|
|
|
How to install (mount) the VB-C50i / VB-C50iR
|
When installing the VB-C50i / VB -C50iR on the ceiling, check that the ceiling is strong enough to bear the weight of the VB-C50i / VB -C50iR including the mounting plate. Installation in a weak location could result in the VB-C50i / VB-C50iR falling and causing serious injury.
|
|
|
How to install (mount) the VB-C50FSi / VB-C50Fi
|
When installing the VB-C50FSi/ VB -C50Fi on the ceiling or a wall, check that it is strong enough to bear the weight of the VB-C50FSi/ VB -C50Fi including the mounting arm. Installation in a weak location could result in the VB-C50FSi/VB-C50Fi falling and causing serious injury. Check that the ceiling can hold either 3 times the weight of the camera and arm or 8kgs (whichever is heavier) for 1 minute.
|
|
|
The lens is not mounted correctly
|
message will display if the camcorder cannot communicate properly with the lens. To correct this error turn the lens until it clicks into the lens mount . If the message does not disappear, unmount the lens, ensure that the lens and camcorder contacts are clean, and then remount the lens.
|
|
|
How to access the Settings Title Page for the VB-C50i / VB-C50iR
|
Take particular care with the IP address, subnet mask, default gateway address and route settings. If errors are found in any of these items, you may be completely unable to access the VB-C50i/ VB -C50iR via Ethernet and it may only be possible to recover the problem by using the Initial Setup Tool to correct the error .
|
|
