| Search Results |
 |
Document Feeding - CR190
|
When using separation OFF mode, you can scan an envelope with thickness up to 0.02" (0.5 mm) or weight up to 111 lb bond (413 g/m 2 ... If the envelope is not the first document in the batch, it may cause a feeding error or a paper jam. Some type of envelopes may cause a feeding error or a paper jam.
|
|
|
Check to make sure the documents are within specifications - CR190
|
Weight: 17 to 40 lb bond (64 to 157 g/m 2 ... Curled, wrinkled, or folded documents may cause an error . ... When using separation OFF mode, you can scan an envelope with thickness up to 0.02" (0.5 mm) or weight up to 111 lb bond (413 g/m 2
|
|
|
Using Ultrasonic Double Feed Detection - CR190
|
The double feed detection function that the scanner is equipped with uses the penetration of ultrasonic waves to detect when two or more documents are fed at the same time. If false detections happen too often, disable the double feed detection function. When using the accompanying Scanning Utility for the CR-190i:
|
|
|
Separation OFF Mode - CR190
|
Thick documents Documents that contain two or more pages together as one document Documents that have a rough surface
|
|
|
Computer System Requirements - CR190
|
Microsoft Windows XP (32bit) SP3 or later Microsoft Windows XP (64bit) SP 2 or later Microsoft Windows Vista (32/64bit) SP1 or later
|
|
|
Setting the Ink Cartridge and Adjusting the Print Position - CR190
|
The ink cartridge needs to be set to print. Set the ink cartridge according to the following procedure. You can adjust the print position to two different levels.
|
|
|
Cleaning the Ink Jet Nozzles - CR190
|
Swipe the ink cartridge 2 or 3 times on the built-in Nozzle Cleaning Pad shown in the diagram below. If the text or bitmap still appear faint after this operation, replace the ink cartridge.
|
|
|
Cleaning with the Cleaning Cards - CR190
|
You cannot scan the document without the computer. Allow 1 to 2 minutes for the moisture on the Canon CR-Series scanner from the cleaning card to thoroughly dry before scanning documents.
|
|
|
Cleaning the Scanning Glass and Rollers - CR190/190II
|
If paper jams and double feeds ( two papers being fed at the same time) still occur after cleaning the rollers, the rollers may be worn. The rollers need to be changed. Some rollers are replaceable.
|
|
|
Daily Cleaning - CR190
|
Cleaning the Main Unit Use the Built-in Nozzle Cleaning Pad to remove the ink from around the ink jet nozzles. Swipe the ink cartridge 2 or 3 times on the Build-in Nozzle Cleaning Pad shown the the diagram below. If the text or bitmap still appear faint after this operation, replace the ink cartridge.
|
|
