| Search Results |
 |
Document Feeding - CR190
|
When using separation OFF mode, you can scan an envelope with thickness up to 0.02" (0.5 mm) or weight up to 111 lb bond (413 g/m 2 ... If the envelope is not the first document in the batch, it may cause a feeding error or a paper jam. Some type of envelopes may cause a feeding error or a paper jam.
|
|
|
Check to make sure the documents are within specifications - CR190
|
Weight: 17 to 40 lb bond (64 to 157 g/m 2 ... Curled, wrinkled, or folded documents may cause an error . ... When using separation OFF mode, you can scan an envelope with thickness up to 0.02" (0.5 mm) or weight up to 111 lb bond (413 g/m 2
|
|
|
Error Can't Open File when trying to use a Bitmap file with Canon Check Reader imprinter
|
An imprinter mechanism, which prints text (5 lines) or a Bitmap on documents as they are scanned, comes standard with Canon imageFORMULA Check Readers. The Bitmap specifications are very specific as shown below. If you don't follow these guidelines you may receive an error "File Can't be Opened" when trying to attach the Bitmap file on the imprinter setup page.
|
|
|
Adjusting the Separation Roller Gap
|
Place two checks or check-stock paper together in the document tray up against the shutter (see Figure 2 ).
|
|
|
Using Ultrasonic Double Feed Detection - CR135
|
The double feed detection function that the scanner is equipped with uses the penetration of ultrasonic waves to detect when two or more documents are fed at the same time. If false detections happen too often, disable the double feed detection function. When using the accompanying Scanning Utility for the CR-135i:
|
|
|
Separation OFF Mode - CR190
|
Thick documents Documents that contain two or more pages together as one document Documents that have a rough surface
|
|
|
Computer System Requirements - CR190
|
Microsoft Windows XP (32bit) SP3 or later Microsoft Windows XP (64bit) SP 2 or later Microsoft Windows Vista (32/64bit) SP1 or later
|
|
|
What is the maximum number of characters that the imprinter is capable of?
|
The CR-50/80 has the built-in imprinter unit as a standard function, which can print endorsement information on checks before scanning. This ink-jet imprinter prints a single line up to 32 characters of 3 x 3mm size (Normal font) or up to 48 characters of 3 x 2 mm (Small font).
|
|
|
Unable to scan thick documents using a CR check transport.
|
Thick documents Documents that contain two or more pages together as one document Documents that have a rough surface
|
|
|
Setting the Ink Cartridge and Adjusting the Print Position - CR190
|
The ink cartridge needs to be set to print. Set the ink cartridge according to the following procedure. You can adjust the print position to two different levels.
|
|
