| Search Results |
 |
Checking Printer Information - MG7720
|
http://XXX.XX. X .XXX For "XXX.XX. X .XXX", enter the IP address that you checked in the "IP Address" column on the network setting information sheet. ... You can set not to display a message by specifying the SSL/TLS settings of certificate for encrypted communication in step 5 . ... This function displays printer information such as the remaining ink amount, the status, and detailed error information.
|
|
|
How to Use Apple AirPrint - MG6220
|
5 . For 1 ... 5 . Check that no error message is displayed on ... Software Version Update Procedure If an error message is displayed, ... ... may cause an error . ... update, the error lamp on the ... Error Causes and Corrective Actions If an error is detected during ... Utility, an error message is displayed. If an error message is displayed, ... ... of the main error messages that may be ... An error occurred during the ... Software Version Update Procedure If an error message is displayed, ... ... may cause an error . ... update, the error lamp on the ... Error Causes and Corrective Actions If an error is detected during ... Utility, an error message is displayed.
|
|
|
List of Messages (VIXIA mini X)
|
Message Possible solution Camera Web Link is not set up An error occurred when transferring data with the CANON iMAGE GATEWAY server. ... Check network settings An error occurred during authentication with the CANON iMAGE GATEWAY server. ... Movie must be less than X min. ... Try again An error occurred when transferring data with the CANON iMAGE GATEWAY server or the server is temporarily down. ... If the same error occurs, wait a while and try again.
|
|
|
List of Messages (VIXIA HF R50/R52/R500)
|
... -in memory error ... in memory writing error ... A memory card error occurred. File name error The file or ... ... Memory card writing error Message Solution Error writing to external ... Wi-Fi error ... Wi-Fi error ... Wi-Fi error ... Connect to a computer and use the dedicated software to set again An error occurred when connecting to the CANON iMAGE GATEWAY server. ... Movie must be less than X min. ... Try again An error occurred when connecting to the CANON iMAGE GATEWAY server or the server is temporarily down.
|
|
|
List of Messages (VIXIA HF R62/R60/R600)
|
... -in memory error ... in memory writing error ... A memory card error occurred. File name error The file or ... ... Memory card writing error Message Solution Error writing to external ... Check if any errors have occurred with the connect station. ... An error occurred while trying to pair the camcorder with the CS100 Connect Station. ... Wi-Fi error ... Wi-Fi error ... Wi-Fi error ... Connect to a computer and use the dedicated software to set again An error occurred when connecting to the CANON iMAGE GATEWAY server. ... Movie must be less than X min. ... If the same error occurs, wait a while and try again.
|
|
|
How to Print Using Apple AirPrint
|
Basic AirPrint Usage 4. Check that the printer has enough paper and ink. 5 . Check that no error message is displayed on the printer operation panel. If the problem persists, use the printer driver on your computer to execute printing and check whether the document can be printed normally on the printer.
|
|
|
Printer specifications- i450 / i455
|
i450 / i455 Specifications (width x height) A4 203.2 x 289.0 mm / 8.0 x 11 .4 in B 5 175.2 x 249.0 mm / 6.9 x 9.8 in A5
|
|
|
How to print Vertical or Horizontal Banners (Large-Format Printing)
|
to start printing. <MacOS X > This topic describes how to print a banner about five times as long as the roll width based on the following example. Document: An original designed for a horizontal banner Page Size: Non-standard (100x500 mm [3.9x19.7 in]) Paper: Roll Paper type: Plain Paper Roll paper width: 16 inches (406.4 mm) Follow the steps below to print a banner in either horizontal or vertical format.
|
|
|
Change the Paper Feed From a Mac - PIXMA iP3600, iP4600 Printers
|
Plain paper Letter size 8.5" x11 ", A5, A4, or B 5 feeds from the cassette. Other paper sizes and types feed from the rear tray.
|
|
|
System Requirements for Applications (EOS 6D Mark II)
|
5 , EOS M3, EOS M10, EOS Kiss X 8i / EOS REBEL T6i / EOS 750D, EOS Kiss X 80 / EOS REBEL T6 / EOS 1300D, EOS 80D, EOS 8000D / EOS REBEL T6s / EOS 760D, EOS 7D Mark II, EOS 6D, EOS 5DS R, EOS 5 DS, EOS 5D Mark IV, EOS 5D Mark III is connected, EOS Utility 2.14 will be started.
|
|
