| Search Results |
 |
Professional Model Firmware Updates
|
|
Error Notification Mails REALis 4K6020Z / 4K5020Z
|
|
Connecting to a Network REALis 4K6020Z / 4K5020Z
|
Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Depending on the method of network connection, preparation on the computer side may be necessary.
|
|
|
Setting Up Email [Mail] REALis 4K6020Z / 4K5020Z
|
From [Mail] in the settings screen, you can set the items necessary to send error mails and test mails. For the setting procedure, see “Network Setting”
|
|
|
Manual Adjustment to Correct Registration REALis 4K6020Z / 4K5020Z
|
Any manual adjustment values set before switching to 5-point adjustment are cleared. 1 In the [Install settings] menu, select [ Professional settings] > [RGB alignment] > [Advanced registration] > [Adjust] > [Manual adjustment]. The projector enters manual adjustment mode, and a chart is displayed.
|
|
|
"Learn With Canon" website available for learning events and articles.
|
Also, "Learn with Canon" in-person, with experiences that educate and inspire. Travel to breathtaking locations, learn from talented and passionate instructors, work with professional models, and bring your vision to life with dream gear in your hands.
|
|
|
Menu Description Install settings REALis 4K6020Z / 4K5020Z
|
> [Install settings] > [Positional lock] • Image flip H/V • Save position (in [Lens - Position]) • Professional settings • Focus adjustment • Zoom • Lens shift reset • Lens shift adjustment • Keystone • Zoom adjustment
|
|
|
Adjusting Projected Images with Partial Distortion Correction REALis 4K6020Z / 4K5020Z
|
Select one of the 54 adjustment points (in a 6 x 9 grid) for precise distortion correction. 1 In the [Install settings] menu, select [ Professional settings] > [Partial distortion correction] > [Adjust] The projector enters partial distortion correction point selection mode, and a window is displayed for selection of areas to correct.
|
|
|
Projecting from Multiple Projectors at Once (Edge Blending) REALis 4K6020Z / 4K5020Z
|
1 Select [Install settings] > [ Professional settings] > [Edge blending] > [Adjust]. 2 Set [Marker] to [On].
|
|
|
Network Setting REALis 4K6020Z / 4K5020Z
|
Setting Errors When a setting-related error occurs, the error name is displayed on the screen, and a “ ” mark is displayed next to the input field which caused the error.
|
|
