| Search Results |
 |
Setup the MP990 for use over a wireless LAN (Windows)
|
Wireless Setup Step-by-step instruction is available on our Wireless Help page to assist you in setting up your printer on your network. Click the appropriate link(s) below for help.
|
|
|
Setup the MP990 for use over a wireless LAN - Mac OS X with multiple Access Points and single SSID
|
Use these instructions if your network has multiple AirPort Networking Devices (including Time Capsule, AirPort Extreme, AirPort Express, etc.) For example: AirPort Extreme AND Time Capsule. Select [Yes], then press the <OK> button. When wireless connection is enabled, the Wi-Fi lamp (B) lights blue. Select [Easy settings], then press the <OK> button.
|
|
|
Accessing, changing or printing the LAN settings (MP990)
|
Accessing / Changing / Printing the LAN Settings Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select Push button method or PIN method according to the method your access point supports, then follow the on-screen instructions.
|
|
|
Setting up the machine for use over a wireless LAN using WPS(Wifi Protected Setup) - MP990
|
If an icon other than appears, improve the communication status by referring to the displayed message or the help file, then click Remeasurement.
|
|
|
Setup the MP990 for use over a wireless LAN using WCN (Windows Connect Now)
|
... you can configure wireless connection settings by ... ... used over a wireless and wired connection ... [ Wireless Connection ] ... environment over a wireless connection. ... computer over a wireless connection without using ... Wireless Setup Using WCN ... Set up a wireless connection by using ... ... WCN, establish wireless communication between the ... ... Click Add a wireless device on the ... ... The Add a wireless device to the ... ... to add a wireless device or computer ... When wireless connection is enabled, the Wi-Fi lamp (B ... ... point, and wireless communication is possible ... appears, improve the communication status by referring to the displayed message or the help file, then click Remeasurement.
|
|
|
Setting up the machine for use over a wired LAN - MP990
|
... used over a wireless and wired connection ... ... . Select Change wireless /wired, ... ... password, click Help , then follow ... ... screen, select MP990 series in Printers ... ... characters after Canon MP990 series is the ... ... ) Select Canon MP990 series and click ... ... , select Canon MP990 series in the ... ... sure that Canon MP990 series is added ... ... , select Canon MP990 series in the ... (3) Make sure that Canon MP990 series is added to the list of printers. ... 4. Select Canon MP990 series on the Scan-from-PC Settings screen, then click OK.
|
|
|
Install the software to set up additional computers for use over a wireless LAN - MP990
|
|
Confirm the correct network name is selected
|
|
Enter the wireless LAN settings on the MP560, MP640, MP990
|
The following information is required to connect to your access point or router. Once the information is obtained write it down for future reference. Important: An "Ad-hoc connection," which establishes a direct connection to the computer over wireless connection without using an access point, is not supported. Be sure to prepare an access point.
|
|
|
Select the new Access Point / Router to configure the connection (MP560, MP640, MP990)
|
The following information is required to connect to your access point or router. Once the information is obtained write it down for future reference. Important: An "Ad-hoc connection," which establishes a direct connection to the computer over wireless connection without using an access point, is not supported. Be sure to prepare an access point.
|
|
