| Search Results |
 |
Connecting the Camera to a Computer using a USB Cable (EOS REBEL T6S / EOS 760D)
|
: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected to a computer. Set [ Wi-Fi /NFC] to [ Disable ], then reconnect the camera to a computer with an interface cable.
|
|
|
Cannot Find Machine on Wireless LAN - MG3620
|
If the Wi-Fi lamp is off, the wireless LAN is disabled . Follow the procedure below to enable the wireless LAN.
|
|
|
Wi-Fi Connection using the WPS Function
|
Connecting using the WPS Function - Even a WPS-equipped access point may have WPS disabled . Ensure WPS is enabled.
|
|
|
Sending images to a computer (Wi-Fi function) (EOS 70D)
|
REFERENCE Set [Auto power off] under the [ ] tab to [ Disable ].
|
|
|
Printing from a Computer via Wi-Fi (Macintosh) (SELPHY CP910)
|
Even during standby, you can print images on a memory card by inserting the card. Automatic access point connection at startup can also be disabled .
|
|
|
Using the Machine with Access Point Mode - MG3620
|
Terminating Access Point Mode Press and hold Wi-Fi ... button, and then Wi-Fi ... lamp changed from flashing to lit, the Wi-Fi ... Follow the procedure below to disable the access point mode and the wireless LAN. ... Press and hold Wi-Fi ... button twice and press Wi-Fi ... lamp changed from flashing to lit, the Wi-Fi lamp goes off, and then the wireless LAN is disabled .
|
|
|
Using Eye-Fi Cards
|
] is set to [ Disable ... In hospitals, airports, and other places where wireless transmissions are prohibited, remove the Eye-Fi card from the camera.
|
|
|
How to use an Eye-Fi card in the EOS Digital Rebel T2i
|
Even if [Eye-Fi trans.] is set to [ Disable ], it may still transmit a signal. In hospitals, airports, and other places where wireless transmissions are prohibited, remove the Eye-Fi card from the camera.
|
|
|
What to do when the Check Printer Settings dialog box is displayed - MG5220
|
During the wireless setup in the ... 1. Before checking the wireless setting 1-1. ... Please do the wireless setting again. ... The operation of the "Firewall" security software may interfere with the communication for the wireless setup. ... Before disabling the "Firewall" operation of the security software, disconnect from the Internet. ... As the following setting interferes with the communication for the wireless setup, change the setting. ... Disable the privacy separator or the network disconnection function.
|
|
|
The printer cannot be detected (the message that the printer could not be detected on the network is displayed) - MX512
|
During the wireless setup in the software installation, when the Check Printer Settings dialog box is displayed, try the solutions 1 to 4 one by one in order. 1. Before checking the wireless setting ... Before disabling the "Firewall" operation of the security software, disconnect from the Internet. ... As the following setting interferes with the communication for the wireless setup, change the setting. ... Disable the privacy separator or the network disconnection function.
|
|
