| Search Results |
 |
BJC-4550 Error Codes - Beeping Flashing Lights
|
Error ConditionsERROR CONDITION BEEPS POWER ERROR RECOVERABLE BY USER Paper pick-up error 1 ... 0 Paper jam error 2 ... 0 BJ cartridge detection* 1 ... 0 UNRECOVERABLE BY USER RAM error 1 1 1 ROM error 2 1 1 Home position error 4 1 1 Waste ink full error 5 1 1 Temperature sensor error 6 1 1 Printing position correction error 8 1 1 Cleaning error 10 1 1
|
|
|
Error Codes - Beeping Flashing Lights BJC-210 / BJC-240 / BJC-250
|
Error Conditions Paper pick-up error 1 . ON Paper jam error 2 . ON BJ cartridge detection* 1 .
|
|
|
Responding to Error Messages
|
|
Error Codes - Beeping Flashing Lights BJC-610 / BJC-620
|
Error Conditions Carriage error 3 0 1 ... ... ... ... ... ... 0 Home position sensor 3 0 1 ... ... ... ... ... 0 ... 3 0 1 ... ... ... ... ... 0 0 Recovery error 3 0 1 .
|
|
|
Troubleshooting Error Messages
|
|
Troubleshooting procedures when getting a ZB Module has encountered and error, error message.
|
Correcting ZoomBrowser error "ZBModule" Try to open ZoomBrowser, if it opens without the "ZB Module has encountered an error" the issue is fixed. If the error message persists, perform the following steps:
|
|
|
ERROR LCD : INSERT CARD or INSERT PHOTO CARD
|
|
Check the ink cartridge and driver settings (Windows 95/98 and Windows Me)
|
Follow the suggestions below to resolve the issue. 1 . Make sure the printer is powered on and that no error conditions exist (flashing lights or beeps).
|
|
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error Symptoms: This problem manifests itself in two different manners: 1 ) Attempting to print from any applications in Win95 does not produce any results: no error messages , no printout, nothing at all.
|
|
|
Try another memory card in the camera and other troubleshooting steps.
|
On Camera LCD screen displays No Memory Card, Memory Card Error, Unrecognized File Format, Incompatible JPEG, or "?" marks for images when card is inserted in the camera or while attempting to Playback images. If after formatting the card in the camera the error persists, try another memory card. If this occurs with only the one card it is likely that the memory card is defective, if the error persists over more than one card the camera may require service. If the card appears to be defective you may wish to contact the memory card manufacturer.
|
|
