| Search Results |
 |
Sending images by email with ZoomBrowser EX 6.x
|
Sending images by email. ] > [Canon Utilities ... 2. When ZoomBrowser EX starts, click [ Print & Email]. ... For questions regarding software operation, please see the Help for your email software.
|
|
|
Print "Help" by selecting "Print the selected topic".
|
When trying to print Help by selecting " Print the selected heading and all subtopics", the picture is not printed . There is no way to resolve this problem as it is an issue of the OS.
|
|
|
Receiving faxes using AnsMode
|
Receiving faxes using AnsMode If the machine runs out of paper or toner in AnsMode, it receives all faxes into memory. The faxes then prints automatically when you add paper or replace the toner cartridge.
|
|
|
Printing a CUPS Test Page in Mac OSX 10.5 / 10.6
|
Printing a test page in Mac OSX 10.5 or 10.6 is different then on a Windows OS. Follow these steps to print the CUPS test page in Leopard or Snow Leopard (Mac OSX 10.5 or 10.6): Open the [ Print & Fax ] window. It is located in [System Preferences].
|
|
|
Print Lists Menu L170
|
Print Lists Menu 1.USER DATA Prints out a list of items set or registered in the Menu. 2.SPEED DIAL LIST Prints the list of the fax /telephone numbers registered
|
|
|
Fax Settings Menu L170
|
Prints a report only when a transmission error occurs. REPORT WITH TX IMAGE Enables/disables printing of the first page of the fax
|
|
|
Using the BJ Setup Utility
|
How to enable, disable, and change some parameters in the BJ Setup Utility To exit the BJ Setup Utility, click EXIT at the top of the screen, then click OK. The majority of the settings in the BJ Setup Utility will only control the printer while printing from DOS. In Windows, you should use the provided Canon printer driver to select the necessary settings.
|
|
|
Receiving faxes in memory when a problem occurs L170
|
Receiving faxes in memory when a problem occurs The machine will automatically receive incoming faxes into its memory if it encounters a problem that prevents it from printing normally. The LCD will display [RECEIVED IN MEMORY] and a message showing the problem. See below the error messages, their cause and the action you need to take to correct the problem.
|
|
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error 3) Next, go back to the "Printers" window, enter Microsoft Fax or Bitfax driver properties and, under the "Details" tab, in the box named " Print to the following port", choose either the COM port onto which the modem is installed or, if not known, choose "File". Click on Apply and then OK. Re-boot the computer.
|
|
|
Sending a fax using Coded Speed Dial
|
Sending a fax using Coded Speed Dial If an error occurs during sending, the machine will print an error report. If this happens, try sending the fax again.
|
|
