| Search Results |
 |
Purchasing supplies and accessories.
|
Where Can I Purchase Supplies and Accessories? The Canon eStore is an easy way to buy Bubble Jet printers, scanners, multifunction printers and facsimile machines , as well as supplies and accessories (like ink and paper) for these products. The eStore Web site can be found at:
|
|
|
Reseat or replace the ink cartridge
|
|
Error Codes - Beeping Flashing Lights BJC-210 / BJC-240 / BJC-250
|
Error Conditions # of BEEPS POWER (Green) ERROR (orange)
|
|
|
Check the parallel port connection and settings
|
You may use the following instructions as a guideline to resolve the issue: Reboot your computer and reset the printer. You can reset the printer by unplugging the printer for 30 seconds while it is still powered on, then plug the unit back into the power source and press the POWER button.
|
|
|
Printing the Test Pages Using the Operator Panel
|
Printing the Test Pages Using the Operator Panel Press and hold the POWER button until you hear the number of beeps that correspond to the test page you want to print.
|
|
|
Installing the printer in Windows XP
|
How do I Install the printer driver in Windows XP? 3. Click Printers and Other Hardware, and then Printers and Faxes . If your printer is already listed in the Printers window, Windows XP has automatically installed the printer driver for you. If not, continue with step 4.
|
|
|
How to Perform Print Head Cleanings
|
How to Perform Print Head Cleanings Make sure printer is turned on. Press and hold the RESUME button for at least two seconds until the printer beeps twice. The POWER light will blink for several seconds while the print head is being cleaned.
|
|
|
Verify that the ink cartridge is working correctly (BC-05 / BC-06)
|
Printout is faint or colors are incorrect Perform a Nozzle test. Make sure printer is powered off. Press and hold the Power button until the printer beeps four times.
|
|
|
Check the ink cartridge and driver settings (Windows 95/98 and Windows Me)
|
Follow the suggestions below to resolve the issue. 1. Make sure the printer is powered on and that no error conditions exist (flashing lights or beeps).
|
|
|
Using the BJ Setup Utility
|
Using the BJ Setup Utility The BJ Setup Utility may be used to enable, disable, or change a large number of printer functions. Among these are the "Automatic Power ON" and "Automatic Power OFF" features as well as the printer emulation (BJ/LQ).
|
|
