Ask a Question
FiltersClear
CMS-CATEGORY_REF
CANON (9)
Content Source
Articles (9)
Products
BJC-240 Series (9)
 
 
Search Results
CMS-XML Error Codes - Beeping Flashing Lights BJC-210 / BJC-240 / BJC-250
Error Conditions Paper pick-up error 1 . ON Paper jam error 2 . ON BJ cartridge detection* 1 .
CMS-XML Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error 2 ) If, while implementing the above step, an error message appears stating that the above changes cannot be saved, close the win.ini anyway, open Windows Explorer, find the win.ini file under C:\windows, right-click on it, go to Properties, take the check mark off from the "read-only" box, click on Apply, and
CMS-XML Check the ink cartridge and driver settings (Windows 95/98 and Windows Me)
Error : Cannot Detect Cartridge Type (Windows 95/98 and Windows Me) ... The error "Cannot Detect Cartridge Type" occurs when the printer driver cannot communicate well enough with the printer to determine the type of cartridge installed. ... 1. Make sure the printer is powered on and that no error conditions exist (flashing lights or beeps). ... 2 . Reboot your computer and reset the printer.
CMS-XML How to Perform Print Head Cleanings
How to Perform Print Head Cleanings Make sure printer is turned on. Press and hold the RESUME button for at least two seconds until the printer beeps twice. The POWER light will blink for several seconds while the print head is being cleaned.
CMS-XML Printing the Test Pages Using the Operator Panel
Printing the Test Pages Using the Operator Panel Test page Number of beeps Demonstration 1 Status Information 2 Test A 3 Nozzle Test Color Cartridge: Black Cartridge:
CMS-XML Ink Absorber Replacement Options BJC-240
Ink Absorber Replacement Options Over the life of the printer, the amount of ink that the ink absorber has absorbed is calculated by the printer. Eventually, after substantial use, the printer will enter an error condition when the ink absorber is nearly full. At this point, printing is still possible by pressing the <Resume> button on the printer.
CMS-XML Reset the printer power cord BJC-Printers
Printer has solid orange light. Printer does not respond. After 20 or 30 seconds, re-connect the power cord, and power the printer on. The error should be resolved at this point.
CMS-XML Windows Vista Comaptibility information (for Printer)
Software for Windows Vista 1. Click Control Panel in the start menu. 2 . Click System and Maintenance. Memo: