| Search Results |
 |
Reset the printer power cord BJC-Printers
|
Printer has solid orange light. Printer does not respond. The printer is showing a steady error light upon power -up. Often, pressing the power button causes the printer to turn itself ON or OFF instantaneously, without going through the usual motions. (other symptoms may include: the power light may just remain green without any carriage motions when turning on or off)
|
|
|
Reseat or replace the ink cartridge
|
|
Error Codes - Beeping Flashing Lights BJC-210 / BJC-240 / BJC-250
|
Error Conditions # of BEEPS POWER (Green) ERROR (orange)
|
|
|
Check the parallel port connection and settings
|
You may use the following instructions as a guideline to resolve the issue: Reboot your computer and reset the printer. You can reset the printer by unplugging the printer for 30 seconds while it is still powered on, then plug the unit back into the power source and press the POWER button.
|
|
|
Printing the Test Pages Using the Operator Panel
|
Printing the Test Pages Using the Operator Panel Press and hold the POWER button until you hear the number of beeps that correspond to the test page you want to print.
|
|
|
How to Perform Print Head Cleanings
|
How to Perform Print Head Cleanings Make sure printer is turned on. Press and hold the RESUME button for at least two seconds until the printer beeps twice. The POWER light will blink for several seconds while the print head is being cleaned.
|
|
|
Check the ink cartridge status and settings
|
Solutions To perform the status test: Make sure the printer is off but plugged in, and has paper loaded. Hold down the power button until the printer beeps 3 times then release the power button. The printer should print a status page.
|
|
|
Verify that the ink cartridge is working correctly (BC-05 / BC-06)
|
Printout is faint or colors are incorrect Perform a Nozzle test. Make sure printer is powered off. Press and hold the Power button until the printer beeps four times.
|
|
|
Check the ink cartridge and driver settings (Windows 95/98 and Windows Me)
|
Follow the suggestions below to resolve the issue. 1. Make sure the printer is powered on and that no error conditions exist (flashing lights or beeps).
|
|
|
Using the BJ Setup Utility
|
Using the BJ Setup Utility The BJ Setup Utility may be used to enable, disable, or change a large number of printer functions. Among these are the "Automatic Power ON" and "Automatic Power OFF" features as well as the printer emulation (BJ/LQ).
|
|
