| Search Results |
 |
Reseat or replace the ink cartridge
|
|
Print Nozzle Check Pattern / Self Test from unit BJC-4000
|
Untitled Document NozzleTest Pattern Power Off and Paper loaded. Press the FF an hold down then press the Power buttons and hold down until printer beeps twice, then release buttons.
|
|
|
Check the parallel port connection and settings
|
You may use the following instructions as a guideline to resolve the issue: Reboot your computer and reset the printer. You can reset the printer by unplugging the printer for 30 seconds while it is still powered on, then plug the unit back into the power source and press the POWER button.
|
|
|
Check the ink cartridge and driver settings (Windows 95/98 and Windows Me)
|
Follow the suggestions below to resolve the issue. 1. Make sure the printer is powered on and that no error conditions exist (flashing lights or beeps).
|
|
|
Using the BJ Setup Utility
|
Using the BJ Setup Utility The BJ Setup Utility may be used to enable, disable, or change a large number of printer functions. Among these are the "Automatic Power ON" and "Automatic Power OFF" features as well as the printer emulation (BJ/LQ).
|
|
|
Ordering parts for your product
|
Ordering Replacement Parts The hours of operation are 9:00 A.M. to 8:00 P.M. EST from Monday to Friday. When calling, speak the term "order parts" when the speech routing system asks the reason for your call. You will immediately be routed to the Parts Desk for assistance .
|
|
|
BJC-4000 Error Codes - Beeping Flashing Lights
|
Error Conditions for the BJC-4000Error Condition On Line HS HQ Error Beeps Paper Misfeed Off ..... On 3 Times Paper Out Off On 3 Times Paper Jam Off On 4 Times Controller Error Off Blinks Blinks On 3 or More Follow these steps to try a resolve the problem: a. Press POWER button to turn off the printer then unplug the power cord. b. Wait 15 seconds, and Plug power cord back in then press the POWER button again to turn on the printer.
|
|
