Receiving faxes using Manual Mode To use this mode, you must have the handset or a telephone connected to the machine. In Manual Mode, the machine rings every time it receives a call, whether the call is from a telephone or a fax machine .
Options for FaxTel Mode When a call comes in, the machine checks to see if it is a person wishing to speak to you or a fax machine trying to send a document. If your machine does not have enough time to detect the fax tone, it assumes the call is from a telephone. Use the [RING START TIME] setting to increase the time the machine takes to check whether a call from a fax machine or a telephone.
This will occur if there are multiple lines and telephone jacks in the same location. Or if the telephone jack is wired for two lines. For example, line one is to be used for voice calls and line two is to receive faxes. Disconnect the fax machine from the telephone wall jack. Connect a known functioning single-line telephone directly to the telephone wall jack.
Setting Up Automatic Redialing With memory sending, you can set the machine to automatically dial the fax number again if the receiving machine does not answer or if the line is busy. You can also control how many times the machine will redial the number and how long it will wait between dialing attempts