| Search Results |
 |
Specifications for the ZR80, ZR85, and ZR90
|
Input/Output Terminals Audio output: -10 dBV (47 kohm load)/3 kohms or less Audio input: -10 dBV/40 kohms or more DV Terminal Special 4-pin connector (IEEE 1394 compliant) Headphone Terminal 3.5 mm stereo mini-jack USB Terminal (ZR90/ZR85) mini- B S -video Terminal (ZR90) 1 Vp-p/75 ohms (Y signal), 0.286 Vp-p/75 ohms (C signal)
|
|
|
Specifications for the Optura 400 and Optura 500
|
Input/Output Terminals 3.5 mm stereo mini-jack -57 dBV (with 600 ohm mic)/5 kohms or more (MIC ATT OFF) -37 dBV (with 600 ohm mic)/5 kohms or more (MIC ATT ON) USB Terminal mini- B S -video Terminal 1 Vp-p/75 ohms (Y signal), 0.286 Vp-p/75 ohms (C signal)
|
|
|
Specifications for the Optura 600
|
Input/Output Terminals 3.5 mm stereo mini-jack MIC Terminal 3.5 mm stereo mini-jack -57 dBV (with 600 ohm mic)/5 kohms or more USB Terminal mini- B S -video Terminal 1 Vp-p/75 ohms (Y signal), 0.286 Vp-p/75 ohms (C signal)
|
|
|
Specifications for the ZR60, ZR65mc, and ZR70mc
|
Input/Output Terminals Audio input: -10 dBV/40 kohms or more DV Terminal Special 4-pin connector (IEEE 1394 compliant) Headphone Terminal 3.5 mm stereo mini-jack USB Terminal (ZR65mc/ZR70mc ) mini- B S -video Terminal 1 Vp-p/75 ohms (Y signal), 0.286 Vp-p/75 ohms (C signal) MIC terminal input ?3.5 mm stereo mini-jack -57 dBV (with 600 ohm mic)/5 kohms or more
|
|
|
Using DV control on the XL2 camcorder
|
After loading a cassette while the connected device is recording: When the XL2 stops recording without operating the start/stop button (e.g. tape has reached the end) while the XL2 and the connected device are recording, the connected device continues recording. When connecting two XL2 s via a DV cable, make sure to set [DV CONTROL] of the connected device to [OFF]. Only one device can be connected to the XL2 for DV control.
|
|
|
Using DV control on the XH A1 and XH G1 camcorders
|
After loading a cassette while the connected device is recording: When the XH A1/G1 stops recording without operating the start/stop button (e.g. tape has reached the end) while the XH A1/G1 and the connected device are recording, the connected device continues recording. When connecting two XH A1/G1 s via a DV cable, make sure to set [DV CONTROL ] of the connected device to [OFF
|
|
|
Installing the Canon Digital Video Solution software (Mac)
|
How do I install the Canon Digital Video Solution software? 1. Close any programs that are running. 2 . Set the Canon DIGITAL VIDEO SOLUTION DISK in the computer' s CD-ROM drive. 3. Mac OS 8.6-9.2 : Double click the CD-ROM
|
|
|
Installing Canon Digital Video Solution software on a Macintosh
|
How do I install the Canon Digital Video Solution software on a Macintosh? 1. Close any programs that are running. 2 . Set the Canon DIGITAL VIDEO SOLUTION DISK in the computer' s CD-ROM drive. 3. Mac OS 8.6-9.2 : Double click the CD-ROM
|
|
|
How to install the Canon Digital Video Solution software on Macintosh
|
How do I install the Canon Digital Video Solution software on Macintosh? 1. Close any programs that are running. 2 . Place the Canon Digital Video Solution Disk in the computer' s CD-ROM drive. 3. Double-click the CD-ROM
|
|
|
HDV video is recorded at 1440x1080 resolution as per the HDV2 standard
|
1080i HDV format video is an industry ratified MPEG2 video encoding standard with an interlaced resolution of 1440 horizontal anamorphic pixels by 1080 vertical pixels and uses a color sampling rate of 4:2:0 with a 25mbps data rate. Audio is recorded at a bitrate of 384kb/ s using MPEG-1 Layer 2 compression.
|
|
