Inserting the Battery The wireless controller operates with two AA (R ... Camcorder and wireless controller are equipped with 2 remote sensor modes ... If the wireless controller does not ... if camcorder and wireless controller are set ... The wireless controller may not ...
Using the Flash The camcorder does not support the Bounce Flash function or the Wireless Multiple Flash System function of the Speedlite 420EX/430EX/550EX/580EX flashes. The camcorder does not support the ST-E 2 Wireless Speedlite Flash Transmitter or the Wireless Sender/Receiver Control function of the Speedlite 420EX/430EX/550EX/580EX flashes. When recording under very dark conditions, as you keep the PHOTO button pressed halfway the AF assist lamp of the Speedlite flash may light on (if recording with autofocus).
Other Precautions and Notes When using the self-timer function, the camcorder normally starts recording after a 10-second countdown, but only 2 seconds when using the wireless controller. The count down appears on the screen.
Other Precautions and Notes When using the self-timer function, the camcorder normally starts recording after a 10-second countdown, but only 2 seconds when using the wireless controller. The count down appears on the screen.
Remote Sensor Mode (When operating 2 Canon DV Camcorders) To prevent interference from other Canon wireless controllers being used nearby, there are 2 remote sensor modes and an off setting. The wireless controller and the camcorder have to be set to the same mode in order to be compatible.
Selecting the Audio Mix When you have selected [VARIABLE], adjust the mix balance with the MIX BALANCE CH1/ 2 and CH3/4 buttons on the wireless controller.
Recording with the Self-Timer The camcorder starts recording after a 10-second countdown ( 2 seconds when pressing [Start/Stop] from the wireless controller). The countdown appears on the screen.
Attach the adapter holder to use the optional CH-910 Dual Battery Charger/Holder or a commercially available wireless microphone receiver. 1. Attach the adapter holder and secure it by tightening the screws. 2 . Adjust the position of the support bars.
