| Search Results |
 |
List of Messages (XF705)
|
âA card error occurred. The camcorder cannot record or display the image. Try removing and reinserting the card, or use a different card.
|
|
 |
Troubleshooting
|
- A card error occurred. Remove and reinsert the card. If the display does not change back to normal, save your recordings (A 151) and initialize the card (A 35).
|
|
|
Relay Recording and Double Slot Recording XF705
|
If an SD card becomes full during double slot recording, recording on both cards will stop. On the other hand, if an error occurs with one of the SD cards , recording will continue on the other card
|
|
|
Recovering Clips XF705
|
Some actions, such as suddenly turning off the cacorder or remvoingg the SD card while data is being recorded, can cause data errors in the recorded clip. Operation mode: Open the index screen with the clip youi wish to recover
|
|
|
Displaying the Status Screens XF705
|
4 Audio format, audio bit depth and audio channels used for recording or output [SD Card ]: Settings used for clips recorded on the card . ... 1 SD card A/SD card B ... Only for SD card B: ... • Depending on the SD card , the total space displayed on the screen may differ from the nominal capacity listed on the card . ... 2 SDI terminal status: Video output*, 3 G -SDI output mapping, output onscreen displays ... 3 Error correction settings
|
|
|
IP Streaming XF705
|
While IP streaming is activated, internal recording to an SD card in the camcorder is disabled but recording to an external device is possible. ... If you selected [RTP+FEC], complete the error correction settings ... This setting uses the RTP protocol and adds a layer of FEC error correction so the receiving side* can recover lost or delayed IP packets. * A decoder compatible with FEC error correction is required. ... FEC Error Correction Settings
|
|
|
Browser Remote: Controlling the Camcorder from a Network Device (XF705)
|
Do not open the card slot covers while using network functions. ... Card selection and approximate remaining recording time The currently selected SD card is indicated with a ... Touch the button to select the other SD card when both card slots contain a card . ... ] (metadata input) screen and for error messages . ... To register a custom white balance: Point the camcorder at a gray card or white object with no pattern so it fills the center of the monitoring/live view screen and touch [
|
|
|
Browser Remote: Controlling the Camcorder from a Network Device XF705 Part 2
|
(metadata input) screen and for error messages . Still, most of the application’s controls emulate physical buttons on the camcorder and appear in English only, regardless of the language selected.
|
|
|
Card Access Indicators XF705
|
|
Using SD Cards XF705
|
