| Search Results |
 |
Troubleshooting
|
- An error occurred while transferring files to the FTP server . Turn then camcorder and the FTP server off and then on again and try again the FTP transfer.
|
|
 |
Displaying the Status Screens XF705
|
2 SDI terminal status: Video output*, 3 G -SDI output mapping, output onscreen displays ... 3 Error correction settings ... 1 FTP server settings (destination server , user name and password*) 2 FTP transfer settings
|
|
|
List of Messages (XF705)
|
âMake sure the address range for the DHCP server is sufficient. ... Wi-Fi connection terminated âAn error occurred on the access point or connected device. ... Wi-Fi error . ... Wi-Fi error . ... Wi-Fi error .
|
|
|
Browser Remote: Controlling the Camcorder from a Network Device XF705 Part 2
|
(metadata input) screen and for error messages . Still, most of the application’s controls emulate physical buttons on the camcorder and appear in English only, regardless of the language selected.
|
|
|
Transferring Recordings and Photos to an FTP Server Using a Wireless Connection (XF705)
|
|
Recovering Clips XF705
|
Some actions, such as suddenly turning off the cacorder or remvoingg the SD card while data is being recorded, can cause data errors in the recorded clip. Operation mode: Open the index screen with the clip youi wish to recover
|
|
|
FTP File Transfer XF705
|
You can transfer clips from the camcorder to another device connected to the network, using the FTP protocol. The following explanations assume that the FTP server is on, ready and correctly configured. Operating modes:
|
|
|
Relay Recording and Double Slot Recording XF705
|
If an SD card becomes full during double slot recording, recording on both cards will stop. On the other hand, if an error occurs with one of the SD cards, recording will continue on the other card
|
|
|
Selecting a Network Connection XF705
|
green – connecting to the network or streaming video (IP streaming only); illuminated in green – FTP transfer active; flashing in red – network error . : Browser Remote
|
|
|
IP Streaming XF705
|
Select the desired option and then press SET. If you selected [RTP+FEC], complete the error correction settings Options
|
|
