| Search Results |
 |
Troubleshooting
|
... refer to the help modules or online ... Precautions Regarding Wi-Fi Networks ... When using a Wi-Fi network, try ... Positioning a network device (access point, mobile device, etc.) - When using a Wi-Fi network indoors, place the network device in the same room as the camcorder. ... Nearby electronic devices - If the transmission rate over a Wi-Fi network drops because of interference from the following electronic devices, switching to the 5 GHz band or to a different channel may solve the problem.
|
|
 |
Connecting to a Wi-Fi Network XF705
|
|
Network Functions XF705
|
About the Network Functions You can connect the camcorder to a wireless network or a compatible network device using Wi-Fi or to a wired network using an Ethernet cable Before using the network functions
|
|
|
Camera Access Point XFF705
|
In this mode the camcorder itself serves as a wireless access point to which other Wi-Fi -enabled devices can connect. Initially, basic settings for a Camera Access Point connection (network name (SSID): [XF705-xxxx_Canon0C], password: [12345678]) are already saved under network configuration profile [1:]. You can use the default settings to connect immediately to the camcorder or follow the procedure below if you wish to change the settings.
|
|
|
Browser Remote: Controlling the Camcorder from a Network Device (XF705)
|
After connecting a network device to the camcorder via Wi-Fi , you can operate the camcorder remotely using Browser Remote, a Web browser application that can be accessed using the Web browser on network devices*. Using Browser Remote, you can check the camcorderâs live view image and control various recording settings. On the Browser Remote screen, you can also check the remaining recording time on the card, remaining battery charge and the camcorderâs time code.
|
|
|
Remote Operation of the Camcorder XF705
|
Finally you can connect a network device to the camcorder via Wi-Fi and use the Browser Remote application to control the camcorder Operating Modes: Using the Supplied Wireless Controller
|
|
|
Selecting a Network Connection XF705
|
In yellow – starting the camcorder’s access point. In white – the camcorder’s access point is ready. Connect the Wi-Fi enabled device to the camcorder.
|
|
|
Projector Features 4K6020Z / 4K5020Z
|
Blend the overlapping edges of images from multiple projectors to make the overall image more seamless. Wi-Fi Connectivity In addition to wired LAN connectivity, the projector also supports Wi-Fi.
|
|
|
Displaying the Status Screens XF705
|
4 Authentication and encryption method 5 WEP index key 6 Wi-Fi frequency band and channel 7 TCP/IP settings of the current network
|
|
|
List of Messages (XF705)
|
If the problem persists, consult a Canon Service Center. No access points found âThe camcorder searched for active Wi-Fi networks (access points) in the area but none were found. Make sure the access point is working correctly and try connecting again.
|
|
