| Search Results |
 |
Key Differences between Digital Photo Professional Ver.4.0 and Digital Photo Professional Ver.3.14
|
Display in the Digital Photo Professional edit image window using the link between EOS Utility and the application Auto Lighting Optimizer RAW/JPEG RAW only Tone Curve Assist No (* 1 ) Yes Movie playback Displays thumbnails, Launch the movie playback application as per the OS settings No Compositing No (*2) Yes HDR No (*2) Yes Batch Application of Recipes No (*2) Yes RGB palette No (*3) Yes
|
|
|
Available Custom Picture Settings
|
or the video signal output from the various terminals. 1 Open the [View Assist .] submenu. [View Assist.]
|
|
|
Manual Focus on the EOS C700 models
|
Manual Focus You can also display a second frame around a different subject. Setup screen: From the [Focus Assistance Functions] screen in step 1 , [OPTIONS] [Focus Guide]
|
|
|
Adjusting focus on the EOS C500 Mark II
|
NOTES > [ Assistance Functions] > [Peaking 1 ] and [Peaking 2] settings to set the color, gain and frequency of the two peaking levels independently of each other. You can use the MENU
|
|
|
61-point automatic selection AF
|
With Single-point Spot AF, focusing with the Speedlite’s AF-assist beam may be difficult. If the camera cannot focus with the EOS-dedicated Speedlite’s AF- assist beam, set the AF area selection mode to Single -point AF (Manual selection) and select the center AF point to focus.
|
|
 |
COMMON STEPS TO PREP THE EOS C300 FOR SHOOTING
|
2. Troubleshooting: If you need help in troubleshooting an issue with the C300 (page 162 of the instruction manual) Canon Customer support line: 1 -855-246-3367 3.
|
|
|
CINEMA EOS
|
The final output Luma video signal is made up of proportions of the three RGB signals and will be subject to their respective noise levels in the dark scene areas and their sepa rate image sensor clipping levels in the highlight areas. The task becomes one of anchoring or m apping a point on the image sensor linear transfer characteristic that defines a reference exposure point that will help ensure optimization of the overall cam era operational performance . The native sensitivity rating of the camera will be defined by the selection of this reference point.
|
|
|
Using the Focus Assistance Functions
|
peaking. 1 Open the [Select] submenu (under [Peaking]) to select the peaking level. ] >
|
|
|
Mirror Lockup
|
Mirror Lockup Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations (mirror shock) can also help when you use a super telephoto lens or shoot close ups (macro photography). 1 Set [Mirror lockup].
|
|
|
Video Scopes
|
The camcorder can display a simplified waveform monitor or vectorscope. It can also display an edge monitor* to help you focus. The video scopes appear only on the LCD screen.
|
|
