| Search Results |
 |
Understanding the EOS C300's Canon Log Gamma
|
To enable View Assist in the menu, choose LCD/VF Setup > View Assist > On/Off Note: The View Assist function is only visible on the C300's LCD screen and viewfinder. This helps ensure that the preview images output to the LCD screen and viewfinder don't affect the images recorded onto CF cards or to images output through the HD-SDI port.
|
|
 |
CINEMA EOS
|
... 2.0 cards . ... Stop dynamic range helps ensure excellent HDR ... The companion EOS C300 M ark II B -Camera supports on -boar d capture of 4K / UHD / 2K / HD using the Canon XF -AVC codec – also on CF ast 2.0 cards [3]. ... 4K RAW recording is supported by a standardized 3 G -SDI interface to a choice of external recorders.
|
|
|
Canon cameras that support GPS
|
About camera GPS Some have an internal sensor. Others use Canon Camera Connect (CCC) which is a unified app that connects your iOS or Android mobile devices to cameras equipped with Wi-Fi or Bluetooth. GP-E2
|
|
|
whitepaper-ergonomic-operational-enhancement-eosc300markii.pdf
|
Figure 19 The Mon output 3 G SDI interface and HDMI interface carries certain camera assist information and the WFM to the external display. 13
|
|
|
What memory cards have been verified to work with the camcorder? (EOS C300 Mark II)
|
Solution The EOS C300 Mark II records 4K and HD clips to CFast cards , and proxy clips and photos to SD, SDHC and SDXC cards . CFast Cards
|
|
|
CINEMA EOS
|
The discussions in the White Paper (Deep Dive Part 1 ) centered about the all -important linear representation of the camera video. Now that video must be further “prepped” in a manner that can help ensure that the extensive dynamic range created by the imaging system will be fully protected while being recorded – and also as it is transported over industry standardized interfaces. This is the primary role of the camera’s Optoelectronic Transfer Function (OETF).
|
|
|
EOS C300 MARK II
|
The recently standardized CFast (2.0) memory card was selected as the primary recording media for the C300 Mark II because of its exceptionally high transfer speed. In the case ofthe SanDisk Extreme Pro card , high-speed transfer is possible at a read speed of up to 450 MB/sec. (3,000x speed) and a write speed of up to 225 MB/sec.
|
|
|
WhitePaper-imageperformanceenhancements-eosc300markii.pdf
|
At ISO 800 the exposure latitude is 6.3-Stops over gray and 8.7-Stops below gray – and this is termed the Base ISO. Increasing ISO levels above this Base level is implemented by an analog gain control within the image sensor itself and this helps maintain a consistent disposition of exposure about the gray reference all the way up to maximum ISO 102,400.
|
|
