| Search Results |
 |
Installing the battery - Sure Shot Classic 120 / Classic 120 Caption
|
|
Sure Shot 80 Tele : How to load the film
|
Slide the back cover latch downwards, the back cover opens Insert the film cartridge, make sure the film is positioned properly between the film guides
|
|
|
Loading the film - Sure Shot Classic 120 / Classic 120 Caption :
|
Open the back cover - push the lever down Load the film Position the film correctly between the film guides Pull the film out to the film leader position indicator - make sure that there is no slack in the film when you pull it out Close the back cover - the film is loaded and "1" appears on the frame counter. If the frame counter shows a blinking "0", the film did not load correctly. Load the film again
|
|
|
Sure Shot OWL PF / OWL PF Date : How to load battery
|
Slide the main switch to OFF and open the battery cover on the bottom of the camera
|
|
|
Loading the film- Elph 370Z
|
Loading the APS film ELPH370Z 1) Open the back cover and load the film Lift the crank (1) and turn to the left (2). 2) Insert film cartridge and close film compartment cover. 3) Slide main switch to the on position to turn camera on.
|
|
|
Installing the battery - Sure Shot Z155
|
Installing the battery - Sure Shot Z155 1. Open the battery cover 2) Load a new battery (Type CR2) Align the positive(+) and negative (-) terminals correctly and insert the battery negative end first. The
|
|
|
Installing the battery - Sure Shot 105u
|
Installing the Battery - Sure Shot 105u 1. Open the battery cover 2) Load a new battery (Type CR2) Align the positive(+) and negative (-) terminals correctly and insert the battery negative end first. The
|
|
|
Loading the film - Sure Shot 115u
|
Loading the film - Sure Shot 115u 1) Open the back cover and load the film Push the back cover release lever down 2) Position the film correctly between the film guides 3) Pull the film out to the
|
|
|
Loading the film - Sure Shot Z155
|
Loading the film - Sure Shot Z155 1) Open the back cover and load the film Push the back cover release lever down 2) Position the film correctly between the film guides 3) Pull the film out to the
|
|
|
Loading the film - Sure Shot Z135 / Z135 Caption
|
Slide the back cover latch downwards - the back cover opens Insert the film - make sure the film is positioned above the film guide Pull the film tip across until it reaches the film tip position mark - make sure the film lies flat Close the back cover Turn the dial to AUTO (turn power ON) - the film advanced to the first frame "1" is displayed in the frame counter
|
|
