| Search Results |
 |
An Error Message is displayed on the Screen (Connect Station CS100)
|
... write down the error message , and contact ... ... icon indicating an error is displayed When an error occurs [ ... icon indicating an error ( ... to check the error status. ... you select the error item and press ... and clear the error . ... from a CF card ... from an SD card ... example explains an error which occurs when ... ... to select the error item, then ... ... , and the error is cleared. ... icon indicating an error is displayed. ... write down the error message , and contact ... ... icon indicating an error is displayed When an error occurs [
|
|
|
Connecting with a camera via a USB cable and saving images (Connect Station CS100)
|
If you connect a camera/camcorder or insert a card and the import of images does not start even when there are images that have not been imported yet, disconnect the camera/camcorder, remove the card , restart Connect Station, then try again. Do not connect a USB cable or insert a card while the Connect Stationâs hard disk is being formatted or its firmware is being updated. ... Importing images from a CF card ... ID : 8202613200_EN_7
|
|
|
The Power Lamp is Illuminated in Red (Connect Station CS100)
|
The Power Lamp is Illuminated in Red (Connect Station CS100) ID : 8202644000 _ EN _ 1 ... If the power lamp is blinking in red, turn on Connect Station and check the TV screen to see the content of the error .
|
|
|
You can use a terminal such as a smartphone or the tablet, to view images stored in Connect Station or send images from the terminal to Connect Station (Connect Station CS100)
|
A transmission error may occur if a power saving feature of the smartphone or tablet is activated during the upload. ... While downloading images from a camera/camcorder or card , uploading images from a smartphone or tablet cannot be performed.
|
|
|
Inserting a memory card and saving captured images (Connect Station CS100)
|
... CS100) ID : 8202613100 _ ... ... Compact Flash) card ... * The CFast card is not supported ... ... . Remove the card slot cover in ... ... . Insert the card into the card slot. ... Insert an SD card with its front ... ... Insert a CF card with its front ... Inserting the card in the wrong ... ... . After a card has been inserted the card into the card slot, the ... An SD card will be ejected ... ... of a CF card , pull it ... ... Connect Station, card , or connected ... ... -Removing the card .
|
|
|
Operating the Remote Control is not Possible (Items to Confirm/Solution Strategies) (Connect Station CS100)
|
Operating the Remote Control is not Possible (Items to Confirm/Solution Strategies) (Connect Station CS100) ID : 8202617200 _ EN _ 1 ... 10 hours Has an error occurred?
|
|
|
Selecting Desired Images From Connect Station and Saving Them to a Memory Card and an External Hard Disk (Connect Station CS100)
|
Use a card or external hard ... The card or external hard ... ... not use a card or external hard ... ... copied to a card or external hard ... Station from that card or external hard ... If a card or external hard ... for initializing the card or external hard ... ... available when a card is not inserted ... ... use an SDXC card or CF card that has been ... , format the card using the camera ... ... them to a card at once. ... . Remove the card slot cover in ... ... . Insert the card into the memory ... ... Insert an SD card with its front ...
|
|
|
Countries and Regions Where Wireless LAN Use is Approved (CS100)
|
Countries and Regions Where Wireless LAN Use is Approved (CS100) ID : 8202623600 _ EN _ 3 Solution In compliance(as of June 2015)with the radio signal regulations of the countries and regions listed below.
|
|
|
Printing with a Wi-Fi Printer (Connect Station CS100)
|
Printing with a Wi-Fi Printer (Connect Station CS100) ID : 8202613300 _ EN _ 1 Solution The procedure for making a Wi-Fi connection from the Connect Station to an access point and printing saved images with a printer is explained in the following sections.
|
|
|
FIRMWARE UPDATE: Connect Station CS-100 Firmware v1.2
|
●During the firmware update, please do not operate the remote control. ●Before the firmware update, please remove the CF card , SD card , and USB cable. (1) Turn on the power of the CS100, and connect the device to the Internet.
|
|
