| Search Results |
 |
Displaying the Electronic Level (EOS 5DS / EOS 5DS R)
|
IMPORTANT Even when the tilt is corrected, there may be a margin of error of approx.± 1 °. ID: 8202603000_EN_1
|
|
|
Installing and removing the CF card on the EOS 5DS and EOS 5DS R
|
2. Remove the card. If a card-related error message is displayed on the LCD monitor, remove and reinstall the card. If the error persists, use a different card.
|
|
|
Error Codes (EOS 5DS / EOS 5DS R)
|
|
Understand "Cannot playback image" message on the camera.
|
Possible issues and resolutions If you have multiple memory cards, initialize another memory card and take some test shots. If images can be played back normally, the card that shows the error message may be malfunctioning. Try reformatting the faulty memory card to solve the issue.
|
|
|
When Attempting to Open Digital Photo Professional, an Error Message Appears (Screen Resolution and Enlargement Scale)
|
Follow the steps below and change the resolution, size and color settings of the computer monitor for Digital Photo Professional to be able to start. 1 . Click [Start] ( ) > [Control Panel].
|
|
|
Correct diffraction errors with Digital Lens Optimizer in Digital Photo Professional Ver.4.x
|
Download lens data You can download data for up to 30 lenses at one time. Data for one lens can be 25 MB. Delete lens data by unchecking the box in the Add or Remove lens data
|
|
|
Formatting the cards on the EOS 5DS and EOS 5DS R
|
Format the card in the following cases: The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed.
|
|
|
Install the Software from the EOS DIGITAL Solution Disk or From the Canon Website
|
Even if the previous version of the software is installed, install the software by following the steps below (the current software will overwrite the previous version). If errors occur during installation, please see the 'Related information' section at the end of the page.
|
|
|
Using EOS Utility 3.x to Send Images to a Computer (Wi-Fi Function)
|
Settings otherwise configured with [Manual setting] can be configured automatically. However, the IP address and similar settings must be automatically assigned and configured in environments using DHCP servers or access points or routers supporting DHCP server functions. If an error is displayed, select [Manual setting] regardless of whether the IP address and similar settings are automatically assigned and configured.
|
|
