Ask a Question
FiltersClear
CMS-CATEGORY_REF
CANON (20)
Content Source
Articles (20)
Connection Type
Wireless (6)
Products
Flashes (20)
Speedlite 430EX (2)
Speedlite 580EX II (4)
Speedlite 470EX-AI (1)
Speedlite 550EX (3)
Macro Ring Lite MR-14EX (1)
Macro Twin Lite MT-24EX Flash (1)
Macro Twin Lite MT-26EX-RT (1)
Speedlite 430EX II (2)
Speedlite 320EX (3)
Speedlite 270EX II (1)
600EX-RT Speedlite (2)
Speedlite Transmitter ST-E3-RT (1)
Macro Ring Lite MR-14EX II (1)
Speedlite 580EX (1)
 
 
Pages [Next]
Search Results
CMS-XML How to set the communication channel on the 430EX II Speedlite.
When the receiver unit ( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec intervals
CMS-XML QuickGuide to Speedlite 600EX-RT Optical Wireless Flash Setup
2. Enable optical transmission on 600 EX -RT receiver unit( s ). Press the Wireless Flash Button until the <OPTICAL TRANSMISSION> icon and <SLAVE> appear. You can combine one or more 600EX-RTs as optical-based receiver units with any combination of
CMS-XML QuickGuide to Macro Speedlite MR-14EX and MT-24EX
The MR-14EX and MT-24EX are fully compatible with the Canon Speedlite wireless flash system. Because the MR-14 EX /MT-24 EX already comprise units A and B of a wireless flash group, you would normally set any additional unit( s ) as a receiver assigned to group C. Be sure to set A: B C ratio. The Macro Lite’s A and B tubes will light the main subject.
CMS-XML Here is a basic wireless flash setup for the 320EX Speedlite
Sample Wireless Flash System You can easily set up an E-TTL autoflash system with the 550EX, ST-E2 or MR-14EX as the sender unit and the 420EX as the receiver unit. Just set the 420 EX's wireless selector to <receiver> and position the receiver unit( s ) as desired within the wireless transmission range
CMS-XML 550EX Speedlite : How to turn the Master Flash OFF and use just receiver unit(s).
The flash ratio can also be changed by changing the distance of the receiver units to the subject. With the EOS 1D, 1 V , 3, D60, D30, Elan 7/7E and 30/33, you can use the modeling flash to check the lighting effect
CMS-XML 580EX Speedlite : How to prevent the sender unit from firing its flash.
You can disable the sender unit from firing so that only the receiver unit( s ) will fire a flash. Press the button so that the display blinks as shown on the left Disable the sender unit's flash firing
CMS-XML The camera show E in Creative Zone when using the 580EX II
CFn-05-1 is geared for EOS -series film cameras .Do not set it if you have a. EOS DIGITAL camera or the E0 S REBEL T2 / 300 _ If CFn-5-1 is set for such cameras, the flash control will not work properly The flash might not fire of it might fire only at full output With Type-A cameras, if C.Fn-05-1 is set, wireless autoflash shooting will not be possible,
CMS-XML Compatible lenses and attachable lenses(MR-14EX II)
RF35mm f/1.8 Macro IS STM EF Macro Lenses EF50mm f/2.5 Compact macro EF100mm f/2.8 Macro EF100mm f/2.8 Macro USM EF100mm f/2.8L Macro IS USM *1 EF180mm f/3.5L Macro USM *2 EF- S 35mm
CMS-XML The 320EX Speedlite will provide flash coverage for the following focal lengths.
The flash head can be extended or retracted manually to match the lens focal length. As the focal length of EF lenses and EF- S lenses differs, extend or retract the flash head while referring to the table below (the flash head position in relationship to the lens focal length).
CMS-XML 430EX Speedlite : Other useful features available when using Full Automatic Wireless Flash.
Flash exposure compensation and other setting set with the sender unit will also be automatically set in the receiver units. Thus, you need not operate the receiver unit( s ). Wireless flash with the following setting can be done in the same way as with normal flash shooting
Pages [Next]