| Search Results |
 |
QuickGuide to Speedlite Transmitter ST-E3-RT Setup
|
... digit wireless radio ID : ... to highlight < ID >. ... from 0 to 9 , the press ... ... set to same ID number . ... same channel and ID , and that ... 2. Confirm that sender and receiver are set to the same channel and ID . ... 5. Confirm that the <LINK> lights on the sender and receivers are lit and green and that the AF- assist beam emitter on the receiver is blinking at 1-second intervals.
|
|
|
QuickGuide to Speedlite 600EX-RT Radio Wireless Flash Setup
|
... 2 to highlight ID . ... from 0 to 9 , then press ... ... set to same ID number . ... same Channel/ ID . ... same channel and ID . ... channel and radio ID . Position the ... Confirm that the <LINK> lights on the 600EX-RT’s are lit and green and that the AF- assist beam emitter on the receiver is blinking at 1-second intervals. ... Confirm that sender and receiver are set to the same transmission channel and radio ID . Position the camera and flash within correct operating range (30 meters/98 feet).
|
|
|
How to set the communication channel on the 430EX II Speedlite.
|
Set the receiver ID . ... Set the receiver ID when using two (A and B) or three (A, B, and C) receiver groups ... When the receiver unit (s) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec intervals
|
|
|
QuickGuide to Canon 270EX II Speedlite Features
|
The receiver ID is set to group A and cannot be changed to group B or C. ... AF- Assist Beam
|
|
|
QuickGuide to Canon Integrated Speedlite Transmitter Operation
|
3. Press the Zoom button again until the "SLAVE" and ID number blink. Use the + or – buttons to dial-in group A, B or C. Press the Speedlite SET button to complete.
|
|
|
Explanation of AF assist beam operation
|
|
220EX Speedlite : How to use the AF-Assist Beam and what is its coverage
|
How to use the AF- Assist Beam and what is its coverage
|
|
|
Specifications of the 550EX Speedlite.
|
Direct- sync, shoe-mount flash with E-TTL/TTL autoflash control and wireless transmission/reception (E-TTL preflash, AF- assist beam, auto zoom, and bounce flash). Compatible Cameras
|
|
|
MR-14EX : How to turn on the Focusing Lamps.
|
In low-light or when the viewfinder image gets darker at high magnification, it becomes difficult to achieve correct focus. In such cases, the focusing lamp can assist with focusing.
|
|
|
550EX Speedlite : How to prevent the sender unit from firing its flash.
|
This setting is called "sender Flash ON" This setting automatically sets the sender unit's receiver ID to A
|
|
