| Search Results |
 |
The camera show E in Creative Zone when using the 580EX II
|
not set it if you have a. EOS DIGITAL camera or the E 0S REBEL T2 / 300 _ If CFn-5-1 is set for such cameras, the flash control will not work properly The flash might not fire of it might fire only at full output With Type-A cameras, if C.Fn-05-1 is set, wireless autoflash shooting will ... If "AF- assist beam 0FF" is set with the Speedlite or camera, the AF assist beam will not be emitted .
|
|
|
Compatible battery packs for the 580EX Speedlite.
|
The 580EX Speedlite is compatible with the Compact Battery Pack CP- E 3, CP- E 4 and the Transistor Pack E .
|
|
|
QuickGuide to Canon Speedlite 580EX II Modes and Functions
|
Note that given a fixed ISO setting, the longer your shutter speed, therefore the more effect that ambient light and any resulting preflash motion blur will have on the image. E -TTL Automatic also has three wireless flash options: Wireless [Off]
|
|
|
580EX II Speedlite : How to set and use wireless flash with three receiver groups.
|
dial to set the flash ratio 8. Set the camera and shoot, set the camera in the same way as with normal flash shooting. With the EOS ELAN II / ELAN II E / 50 / 50 E , EOS REBEL G/500N, EOS IX, EOS IX LITE/IX7, EOS REBEL 2000/300 and REBEL XS N/REBEL G II/EOS 3000N/66, the flash ratio cannot be set with multiple Speedlites
|
|
|
580EX II Speedlite : How to set flash ratio with E-TTL II.
|
Set the wireless mode to <receiver> Press the button so that <A> blinks
|
|
|
Reset C.Fn-5 is set to 0 (E-TTL).
|
With Type-A cameras, if C.Fn-05-1 is set, wireless autoflash shooting will not be possible If "AF-assist beam OFF" is set with the Speedlite or camera, the AF-assist beam will not be emitted. With Type-B cameras, even if C.Fn-05-0 is set, E-TTL II/E-TTL autoflash will not work
|
|
|
Using Nickel Zinc batteries in the Canon Speedlites.
|
|
Troubleshooting: The Speedlite does not fire.
|
The batteries are installed in the wrong orientation Install the batteries in the correct orientation The Speedlite's batteries are exhausted If the flash recycling time takes 30 sec. or longer, replace the batteries. Install the Speedlite's batteries even when you use an external power source
|
|
|
580EX II Speedlite : Recycling times and number of bursts (flashes).
|
Recycling time with 4 fresh AA alkaline or NiMH batteries in the flash itself
|
|
|
580EX II Speedlite : How to set the communication channel on the Speedlite.
|
If there is another Canon wireless flash system nearby, you can change the channel number to prevent signal confusion. the sender and the receiver units must be set to the same channel number.
|
|
