... (s) Wireless Switchover With wireless selector Wireless Selector Positions 1. E - TTL autoflash ... AF- assist beam emitter blinks ... ... by the following wireless operations: ... alkaline LR6 batteries (6 V ... 15/51 batteries x 4 Size ... Lithium FR6 batteries (6 V ... Compact Battery Pack CP- E 2 Size-AA alkaline ... 6 (AM-3) batteries (9 V) x 6; Transistor Pack E Battery Magazine TP ... -2) batteries (9 V ... Ni- Cd batteries x 6 in sealed pack) SE Mode
The following wireless E -TTL autoflash procedure is for a sender unit with three receivers units. This procedure sets the A:B flash ratio and the flash exposure compensation amount for receiver unit C
Uses Canon Battery Magazine TP (six size-C alkaline batteries) or Ni-Cd Pack TP Compact Battery Pack CP- E 2 Uses six size-AA alkaline or nickel-hydride batteries, lithium batteries can also be used.
1. As with studio flash units, you can set the receiver units flash output yourself for wireless or manual flash photography 2. For wireless manual flash photography with Wireless Transmitter ST- E 2. On a receiver unit with the wireless selector set to <receiver>, press the <MODE> button for at least 2 sec.
To prevent your sender unit from firing another photographer's receiver units, four channels are provided to differentiate your receiver units from unrelated ones. The sender unit and receiver unit(s) in the same wireless flash system must be set to the same channel No.
Make sure the sender unit's pilot lamp is lit and the receiver units are ready Press the pilot lamp to test the wireless transmission Focus the subject and take the picture.
