Search Results |
|
User Support Tool
� A computer with 100 BASE-TX/10 BASE-T network support or USB ports. � Memory (RAM)*: - For Windows 128 MB or more - For Macintosh 32 MB or more � Available hard disk space: 100 MB or more* � Display - For Windows Resolution: 640 x 480 pixels or more Display colors: 256 or more - For Macintosh Resolution: 800 x 600 pixels or more Display colors: 256 or more * For Macintosh, it may vary depending on the size of firmware.
|
|
|
Fax Error Codes for L120
|
|
Fax Error Codes (L90)
|
|
Remove foreign object from paper feed area (B95)
|
|
Set RX (Receive) Start Speed to a slower setting (FAX-JX200)
If phone line conditions are less than perfect, transmission (send) and reception (receive) problems can occur. Decrease the reception (RX or receive) speed if frequent fax transaction error messages appear on the LCD.
|
|
|
Set RX (Receive) Start Speed to a slower setting (FAX-JX210P)
If phone line conditions are less than perfect, transmission (send) and reception (receive) problems can occur. Decrease the reception (RX or receive) speed if frequent fax transaction error messages appear on the LCD.
|
|
|
Receiving faxes in memory when a problem occurs L170
Receiving faxes in memory when a problem occurs The machine will automatically receive incoming faxes into its memory if it encounters a problem that prevents it from printing normally. The LCD will display [RECEIVED IN MEMORY] and a message showing the problem. See below the error messages , their cause and the action you need to take to correct the problem.
|
|
|
Setting Send Result Reports to Print Automatically
Transmission failed. If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. 1. Press [
|
|
|
Setting the Paper Size and Type
An error message appears or the machine may not perform as expected.
|
|
|
Load paper properly into the B45
Fan paper prior to inserting it into the Automatic Sheet Feeder (ASF). Slide the paper guide [2] snugly against the left edge of the stack. Note: Be careful not to press the paper guide strongly against the stack, or the paper will not be fed properly. If an error message appears on the display, press <STOP> to clear the error .
|
|