| Search Results |
 |
ERROR LCD "System Error EXXX" (L100)
|
Turn OFF the power switch, wait 10 seconds, and turn the power switch ON again. If the problem is not solved, turn OFF the power switch, disconnect the power cord, and contact your local authorized Canon dealer or the Canon help line.
|
|
|
Plug into an approved AC power source
|
Plug into an approved AC power source Generator power tends to rise and fall depending on the demand placed on the generator. This type of fluctuation will hamper the timing sequence of the copier and, as a result, produce errors . Plugging the copier into an approved AC power source will resolve this issue.
|
|
|
LCD Messages FAX-JX200
|
LCD Messages ... fax encounters an error . ... , if the error does not clear ... An error requiring servicing might ... ... and unplug the power cord of the ... ... , plug the power cord of the ... ... If the same error occurs, service ... DATA ERROR An error has occurred and ... An error requiring servicing might have occurred. Turn OFF the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in and turn ON the machine. If the same error occurs, contact a Canon service representative.
|
|
|
Common Settings Menu L170
|
Common Settings Menu the power cord is connected, or the AUTO CLEAR ... to 3 ERROR ONLY ... to 3 ERROR ONLY ... to 3 ERROR ONLY ... to 3 ERROR ONLY
|
|
|
Cannot Send a Fax
|
Solution Has the power switch been just turned ON? ... Has an error occurred during a transmission? Print the Communication Management Report to check for errors . ... Is BUSY/NO SIGNAL shown on the ERROR TX REPORT?
|
|
|
Cannot Send a Fax
|
Has the Power Switch Been Just Turned ON? ... Has an error occurred during a transmission? ... Check the display for an error message . Print the Communication Management Report to check for errors . ... Is <Busy/No Signal> shown in the error transmission report?
|
|
 |
User Support Tool
|
Do not turn OFF the power of the machine until the restart is complete. ... If any of the error messages shown below are displayed, follow the remedy procedure to resolve the problem.
|
|
|
Fax Error Codes for L120
|
|
Fax Error Codes (L90)
|
|
Remove foreign object from paper feed area (B95)
|
