| Search Results |
 |
Common Settings Menu L170
|
Common Settings Menu to 3 ERROR ONLY 1
|
|
|
Changing the volume settings B95
|
Volume Control 0 (off), 1, 2 or 3 Set the fax to ring (in FaxTel, FaxOnly) ON or OFF Set the volume of the line (Hook) monitor (sound during dialing). 0 (off), 1 , 2 or 3 Set the volume of the error alarm sound. 0 (off), 1, 2 or 3 Set the volume of the error keypad.
|
|
|
Printer Settings Menu L170
|
Printer Settings Menu next job manually. 3 . ERROR TIME OUT Sets the length of time before the machine returns an error
|
|
|
Set RX (Receive) Start Speed to a slower setting (FAX-JX210P)
|
If phone line conditions are less than perfect, transmission (send) and reception (receive) problems can occur. Decrease the reception (RX or receive) speed if frequent fax transaction error messages appear on the LCD.
|
|
|
Sending a fax on the FAX-JX210P
|
Sending Documents If an error occurs during sending, the fax beeps intermittently for a few seconds and an error message appears on the LCD. If this happens, correct the problem and then press <Stop>, then try sending the document again.
|
|
|
Initial Hardware Setup - FAX-JX210P
|
important: If the Holder moves to the right side, close and reopen the Cover to return the Holder to the left. reference: If an error message is displayed on the LCD, refer to .
|
|
 |
User Support Tool
|
3 - 3 An Error Message is Displayed........................................... ... .............................................. p . 17
|
|
|
Menu Route Map
|
CommunicationManagementSettings On TXDoneVolume: 1 to 5 Sound Only When Error Occurs TXDoneVolume: 1 to 5 RX Done Tone
|
|
|
Adjusting/Changing the Volume settings (L80)
|
Adjusting/Changing the Volume Settings / 3 ALARM VOLUME Selects the error alarm volume. 0(off)/1/2
|
|
|
Changing the volume settings FAX-JX200 / JX210P
|
Volume Control ALARM VOLUME Set the volume of the error alarm sound. 0 (off)/1/2/3
|
|
