Search Results |
|
User Support Tool
2 Make Sure That the Error Indicator Is Off Make sure that the Error indicator on the operation panel of the machine is off. If the indicator is lit up or blinking, check the error message on the display of the machine, and refer to the manual supplied with the machine to resolve the error .
|
|
|
Clearing jam from inside the machine L170
Clearing jam from inside the machine Be sure to push the paper release levers back to their original position. If the levers are left pushed down, the paper jam error will not be resolved .
|
|
|
ERROR LCD "System Error EXXX" (L100)
Turn OFF the power switch, wait 10 seconds, and turn the power switch ON again. If the problem is not solved , turn OFF the power switch, disconnect the power cord, and contact your local authorized Canon dealer or the Canon help line.
|
|
|
Plug into an approved AC power source
Plug into an approved AC power source This type of fluctuation will hamper the timing sequence of the copier and, as a result, produce errors . Plugging the copier into an approved AC power source will resolve this issue.
|
|
|
Setting Receive Result Reports to Print Automatically
Solution ... If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. ... If you want to print the report only when a receive error occurs: ... ] to highlight <Only When Error Occurs>, and then press [OK].
|
|
|
Setting Send Result Reports to Print Automatically
Solution Send Results ... If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. ... If you want to print the report only when a send error occurs: ... ] to highlight <Only When Error Occurs>, and then press [OK].(2)
|
|
|
Setting a Communication Management to Print Automatically
Solution ... If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine.
|
|
|
Setting the Paper Size and Type
Solution Setting the Paper Size and Type ... An error message appears or the machine may not perform as expected.
|
|
|
Adjusting the Volume
Solution ... If <Only When Error Occurs> is selected, the machine makes a sound only if an error occurs.
|
|
|
Cannot Send a Fax
Solution Has the power switch been just turned ON? ... Has an error occurred during a transmission? Print the Communication Management Report to check for errors . ... Is BUSY/NO SIGNAL shown on the ERROR TX REPORT?
|
|