Search Results |
|
PIXMA / MAXIFY Products: Windows 10 / Windows 11 on ARM-Based Computers
... 2420 MG252 X MG292x ... ... MX420 MX 43 x MX45 ... ... you require additional help , please create ... Or if you still need help , visit our Canon Community by clicking the button below to get answers: ___________________________________________________________ ...
|
|
|
Paper Handling
A4 (8 1/4" x 11 3/4" (210 mm x 297 mm))*1*2*3 NOTE Default paper size:
|
|
|
Print Media Requirements
Print Media Requirements LTR (Letter) 8.5 x 11 in. (216 x 356 mm) LGL (Legal)
|
|
|
Setting paper size on the B45
For copying and receiving faxes, you need to set the size and type of print media loaded in the multi-purpose tray. Press [<] or [>] to select from the following. LTR - for letter-sized (8.5" x 11 ") paper A4 - for A4 size paper
|
|
|
Cleaning of imageCLASS Products
For the purpose of helping to sanitize your Canon imageCLASS product, it is recommended that you clean parts touched with the hands such as control panels, covers and jam locations with isopropyl alcohol using the following precautions:
|
|
|
Replace / Install an ink tank (B740)
This section describes how to replace an ink tank in an installed Color BJ cartridge. The machine has an automatic protection feature that helps keep it from overheating. If the cartridge holder does not move, unplug the machine and let it cool for several minutes. Then plug it in again.
|
|
|
Setting the Paper Size and Type
] to highlight <Custom Size>, and then press [OK]. 4. Specifies the size of < X > direction and <Y> direction. For paper size, specify within the possible range of length and width (<Y>
|
|
|
Installing the Driver - FAX-JX210P
Installing the Software It takes about 60 seconds for [ON] to light green. When the machine is recognized by the computer, a message appears on the screen. If you cannot go to the next procedure after 10 minutes, click Help and confirm the message.
|
|
|
If "Paper jam." Appears
Contact your local authorized Canon dealer or the Canon help line for assistance , if needed.
|
|
|
Printer Properties Page Setup tab Win2000/XP L120
Edit Watermark Specifies the position where the watermark is printed on each page. You can enter the values in the [ X ] and [Y] edit boxes (in a range between -50 and +50), or use the X and Y slide bars to move the position. [Move to Center]
|
|