| Search Results |
 |
Disabling RX Restriction (L80)
|
|
Memory Reception (L120)
|
Memory Reception The machine automatically receives faxes in memory when printing is disabled under certain conditions (i.e., toner or paper has run out). You can also set the machine to receive faxes in memory during a certain time period of your choice, with password protection if required.
|
|
|
Setting ECM TX to ON / OFF (FAX-JX200)
|
Enable / disable Error Correction Mode when sending a fax.
|
|
|
Printer Settings Menu (L75/L80)
|
Printer Settings Menu RX REDUCTION Enables/ disables reduction of faxes to fit on the paper loaded in the multi-purpose tray.
|
|
|
Report Settings Menu (L75/L80)
|
Report Settings Menu TX REPORT PAGE WITH IMAGE Enables/ disables automatic printing of a TX (transmission) REPORT.
|
|
|
RX (Reception) Settings Menu
|
RX (Reception) Settings Menu ECM RX Enables/ disables Error Correction Mode (ECM) during recption. ON
|
|
|
Change the ring count on a L75
|
The default setting is [OFF]. When the RX MODE setting is set to FAX ONLY MODE or FAX/TEL AUTO SW, this setting enables/ disables ringing when the machine receives a call. Even if you have set INCOMING RING to ON, ringing will only occur if you have connected the handset or an extension telephone to your machine.
|
|
|
Adjusting the Volume
|
] or [ ] to highlight <On> (sound enabled) or <Off> (sound disabled ), and then press [ OK ]. Proceed to step 5.
|
|
|
Change the Automatic Printing setting on FAX-JX200
|
Setting Automatic Printing To disable ink low automatic printing, use
|
|
|
Setting the Daylight Saving Time on a L170
|
Setting the Daylight Saving Time > or < > to select [ON] to enable the daylight saving time setting or [OFF] to disable it, then press <Set>. If you selected [ON], go to step 5.
|
|
