Search Results |
|
Make sure subaddress and/or password match the settings on other machine (L75/L80)
If you do not require a subaddress/password, you can retrieve the document without having to enter these numbers. If the other party is using a Canon fax machine and their machine does not support subaddress/password transactions, ask them to set the polling ID on their fax machine to 255 or 11111111 binary.
|
|
|
RX (Reception) Settings Menu
RX (Reception) Settings Menu FAX /TEL AUTO SW ... MODE or FAX /TEL AUTO SW, this setting enables/ ... setting determines if the machine switches to fax receive ... time the machine rings before switching to fax receive ... REMOTE RX ID Enables/disables remote receiving. ... receiving ID . ON ... the bottom of each received fax page.
|
|
|
Receiving a fax using DRPD mode
you have subscribed to a DRPD (Distinctive Ring Pattern Detection) service with your telephone company. This service assigns two or more telephone numbers with distinctive ring patterns to a single telephone line, allowing you to have a fax number (s) and a telephone number(s) using only one telephone line. Your machine will automatically monitor incoming calls and based on the ring pattern, will let you know if the call is a fax or voice call.
|
|
|
Registering Group Dialing (L80)
To send a fax to multiple locations at the same time (Group Dial), you must first enter (register) the fax numbers using either 1-Touch Spd dial or Coded Spd Dial. Once all of the individual fax numbers have been stored on the unit, you can group them together by creating a Group Dial. Group dials can be saved to either a (just push one button to send to the Group dial) or (push Coded Dial and the number to send to the Group dial).
|
|
|
Sending the document Overseas
Sending a fax Overseas (from the U.S.)
|
|
|
Memory Sending (L80)
Memory Sending Load the document, face down in the ADF. Dial the other party's fax number .
|
|
|
Scanning a document into Memory for Delayed Sending.
Scanning a document into Memory for Delayed Sending. 6. Press [Set]. 7. Enter up to 116 fax numbers you want to send to using any of the following methods:
|
|
|
Receiving a fax while Performing Other Tasks
|
|
How to change the receive mode when fax machine is set to DRPD (L80)
Set unit to FaxTel mode first When the L80 is set to DRPD, you must change the receive mode to FAX /TEL before being able to change to ANS MODE or MANUAL MODE. Follow the procedure below to change the Receive Mode to FAX/TEL first.
|
|
|
Cleaning of imageCLASS Products
For the purpose of helping to sanitize your Canon imageCLASS product, it is recommended that you clean parts touched with the hands such as control panels, covers and jam locations with isopropyl alcohol using the following precautions:
|
|