| Search Results |
 |
Allow the toner cartridge to adjust to the room temperature
|
To remove the possibility of condensation from the toner cartridge, leave it in the protective bag for two hours before inserting it in the copier.
|
|
|
Copy Yield
|
Copy Yield Canon Starter Cartridge - approx. 2 ,000 copies (A4 at 5% ink coverage) (included with the copier)
|
|
|
Installation Procedure
|
Installation Procedure Do not insert the copier plug, press the power switch or turn the power ON before completing steps 2 to 7. If you do, you could damage your copier.
|
|
|
Removing/Storing Shipping Screws-PC 940/941
|
Removing/Storing Shipping Screws Remove shipping attachment (1) on the left side of the main unit. Remove shipping attachment ( 2 ) on the right side of the main unit. Lift the main unit lever on the left side of the main unit and open the main unit.
|
|
|
Closing the cassette
|
Closing the Cassette When closing the cassette, make sure to push it in completely as far as it will go, as shown below in the illustration (1). If copying is performed when the cassette is not pushed in completely, as is shown below ( 2 ), it will cause a paper jam.
|
|
|
General Specifications - PC 940
|
Specifications Up to Legal size Sheets, books, and three-dimensional objects (up to 4.4 lb ( 2 kg)) Acceptable Copy Stock Cassette Feeding: 17 lb to 20 lb (64 g/m2
|
|
|
Loading Paper in the Cassette-PC 940
|
Loading Paper in the Cassette The cassette holds up to approximately 250 sheets of 20 lb bond (80 g/m 2 ) copy paper. Load the paper stack beneath the cassette's length guide (1) and width guides (2) (see illustration above).
|
|
|
Transporting Your Machine-PC 940
|
Transporting Your Machine If you do not follow these precautions, the copier may get damaged or the quality of your copy images may be adversely affected. Also, if the copier is still hot when carrying out the steps below, you may not be able to attach the shipping attachments. If this happens, let the copier cool down for at least two hours and then try again.
|
|
|
Copying Thick Books or Large Originals
|
Copying Thick Books or Large Originals The maximum allowable weight that can be placed onto the platen glass is 4.4 lbs ( 2 kg). Do not press down on the original with excessive force.
|
|
|
Handling and Storing Precautions
|
Handling Precautions When the copier is exposed to such conditions, allow at least two hours for the copier to adjust to room temperature before attempting to use it.
|
|
