| Search Results |
 |
Using the internal extender on the EF 200-400mm f/4L IS USM Extender 1.4x
|
Internal Extender Switch * There are times when an error message will be displayed and shooting operation is prevented. If this occurs, please turn the camera OFF and then ON.
|
|
 |
EOS R SYSTEM MOUNT ADAPTERS BATTERY GRIP
|
/ 135.8 x 98.3 x 84.4mm Approx. 5.35 x 3.87 x 2.67 in. / 135.8 x 98.3 x 67.7mm (from grip to monitor) Weight (CIPA) 23.28 oz. / 660 g (including battery pack and card )
|
|
|
EF lens warranty information.
|
The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the United States and Canon Canada Inc., in Canada (herein referred to collectively as "Canon") with respect to the Canon Binoculars and Photographic Lens Products packaged with this Limited Warranty and identified by model number on this limited warranty card (each a "Product")when purchased and used in the United States or Canada.
|
|
|
Using Extenders - EF300mm f/2.8L IS II USM
|
Attach the extender to the lens, and then attach the OO lens to the camera. To remove it, reverse the order. Errors may occur if you attach the extender to the camera first.
|
|
|
TS-E90mm f/2.8 : How to set Exposure Compensation
|
When using a TS-E lens without tilting or shifting, all AR modes can be used as with normal lenses. Tilting or shifting, however, causes a metering error of up to one stop. since the slight exposure variation caused by this error depends on the tilt and/or shift amount, compensate the exposure as necessary.
|
|
|
How to set Exposure Compensation when using the TS-E17mm f/4L
|
The use of AE is not recommended when the lens is tilted or shifted as exposure errors may result. It is recommended that you use the exposure values when the tilt shift scale are set to the "0" position as a guide and then take the shot with as many exposure settings as possible
|
|
|
Using the Image Stabilizer Modes - EF-S17-85mm f/4.5-5.6 IS USM
|
Using the Image Stabilizer Mode Set the STABILIZER switch to OFF when you are taking pictures using the BULB setting (long exposures). If the STABILIZER switch is set to ON, the image stabilizer function may introduce errors . The Image Stabilizer might not be fully effective in the following cases:
|
|
|
Using rotation on the TS-E MACRO lenses
|
Using Rotation In order to prevent shifts in position while shooting, shooting with rotation locked or at a click position is recommended. If using digital Photo Professional to perform lens correction (lens aberration correction, Digital Lens Optimizer, etc.)*, shooting with rotation locked or at a click position is recommended so as to reduce the amount of correction error . *Supported cameras: EOS 6D Mark II (As of August 2017)
|
|
|
EF 35-80mm f/4-5.6 III Specifications
|
This extremely lightweight, compact design provides a standard zoom lens with outstanding cost performance. Post- card size close up photography is possible at 80mm.
|
|
|
Recovering from a failed firmware update procedure with the EOS 1Dx or EOS 5D MkIII and EF 40mm f2.8 STM
|
To restart the firmware update please follow the below procedure. 1. Remove the battery from the camera and remove the lens from the body, do not remove firmware update card . 2. Reinsert the battery and in the camera's menu go to "SET UP3" and select "Battery info."
|
|
