| Search Results |
 |
Network Camera Camera Management Tool User Manual
|
... , turn the power of the camera ... Memory Card Operations ...................................67 Messages Error Messages ........................................... 75 Warning Messages ..... ...
|
|
 |
What the Log Viewer does in the VB-C10 / VB-C10R software
|
The log displays error codes . For error codes, refer to chart further below
|
|
|
What the Log Viewer does in the VB-C50i / VB-C50iR software
|
Code - The log displays error codes . For error codes, refer to Log Messages Error codes are displayed with one of 4 types of icons according to level.
|
|
|
Display Screen for VB Viewer
|
(13)Information Field - Information messages, warning messages and error messages are shown to the user. (14)[Get a Snapshot] button - A still image from the moment of clicking is displayed in a new window. (15)
|
|
|
How to Operate the VB-C60 Viewer Software
|
14. Preset Selection Box - You can control the camera using presets registered to the camera in advance. 15. Information Field - Information, warning and error messages are displayed.
|
|
|
Part Names
|
1 Reset switch - Turn on the power while pushing this switch using a sharp object. Continue to push the switch for 5 seconds or more to restore all factory settings except for the date and time.
|
|
|
Programing Modifiers
|
Note Õ A runtime error will occur if the specified name does not match. Õ If this modifier is not defined, Ó¥Ô will be deleted.
|
|
|
Make sure that the plug is plugged in correctly, and that the outlet works.
|
Check that the plug is inserted into the main power outlet correctly and pushed in all the way. You may want to try another outlet.
|
|
|
Batteries may need to be recharged or replaced.
|
Batteries may need to be recharged or replaced if an error persists after battery recharge, or the unit may require a service evaluation. If the battery is currently in the device, and it is not working properly, remove the batteries and wait for 30 seconds and re-insert the batteries. In doing so, if your camera has a back-up or date and time battery, remove this battery as well.
|
|
|
Connecting the Camera (VB-hH41 / VB-M40)
|
Connecting the Camera (VB-hH41 / VB-M40) Power Connection Power can be supplied to the camera in the three ways described as follows.
|
|
