| Search Results |
 |
Appendix – Specifications
|
VB-H651VE: ( x H) 180 x 135 mm (7.09 x 5.31 in.) (Camera only. Excluding ceiling plate) VB-H651V: ( x H) 150 x 129 mm (5.91 x 5.08 in.) (Camera only. Excluding ceiling plate)
|
|
|
Network Camera Camera Management Tool User Manual
|
Status Connection status of the camera 0: Not connectable 1: Connectable 2: Authentication required 3: Connectable ( error ) 4 : Admin Required SettingStatus Last performed operation IPv4Address IPv4 address AutoIP IPv4 address (AutoIP) 3
|
|
 |
Display Screen for VB Viewer
|
(13)Information Field - Information messages, warning messages and error messages are shown to the user. (14)[Get a Snapshot] button - A still image from the moment of clicking is displayed in a new window. (15)
|
|
|
How to Operate the VB-C60 Viewer Software
|
14. Preset Selection Box - You can control the camera using presets registered to the camera in advance. 15. Information Field - Information, warning and error messages are displayed.
|
|
|
What the Log Viewer does in the VB-C10 / VB-C10R software
|
Error codes are displayed with one of four types of icons according to level. Date & Time The date and time when the log was generated is displayed.
|
|
|
What the Log Viewer does in the VB-C50i / VB-C50iR software
|
Code - The log displays error codes. For error codes , refer to Log Messages Error codes are displayed with one of 4 types of icons according to level.
|
|
|
How to use the SD Memory Card Access for the VB-M600D VB-M600VE VB-M700F
|
You can set the camera so that the following data is saved automatically to the camera's SD memory card. JPEG images stored when HTTP or FTP upload failed during network errors Log
|
|
|
Programing Modifiers
|
Note Õ A runtime error will occur if the specified name does not match. Õ If this modifier is not defined, Ó¥Ô will be deleted.
|
|
|
Batteries may need to be recharged or replaced.
|
Batteries may need to be recharged or replaced if an error persists after battery recharge, or the unit may require a service evaluation. If the battery is currently in the device, and it is not working properly, remove the batteries and wait for 30 seconds and re-insert the batteries. In doing so, if your camera has a back-up or date and time battery, remove this battery as well.
|
|
|
Creating a Camera Specification File
|
Up to 30 cameras can be registered. If camera information for more than 30 cameras is listed, an error will occur when the file is loaded into the Camera Angle Setting Tool.
|
|
