| Search Results |
 |
Configure the Mail Server
|
|
Changing the Storage Server IP Address
|
|
Specify the Storage Server Group for Starting the Viewer
|
|
[RTP] RTP Server, Audio Multicast and RTP Streaming
|
[RTP] RTP Server , Audio Multicast and RTP Streaming The following can be set here. • RTP Server
|
|
|
[Server] Setting the Video Server, Audio Server and HTTP Server
|
[ Server ] Setting the Video Server , Audio Server and HTTP Server The following can be set here. Õ Video Server
|
|
|
[Date and Time] Setting Date and Time
|
(1) [Setting Method] Select from [Set manually], [Synchronize with NTP server ], [Synchronize with NTP broadcast], [Synchronize with computer time]. (2) [Date], [Time]
|
|
|
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer
|
Select the destination of a video recorded when an event occurs. To record to a server selected on the [Upload] in the setting page, select [Upload] and to record to a memory card inserted in the camera, select [Record to Memory Card].
|
|
|
[Upload] Setting HTTP/FTP Upload and E-mail Notification
|
• If the camera is set to perform upload or e-mail notification continuously, not all video or e-mails may be sent depending on the video size and the network condition to the server . In this case, an event log message is displayed
|
|
|
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc
|
Select [Manual] or [Auto (DHCP)] in the address setting method. If [Manual] is selected, directly enter the values according to the environment in which the camera is used. If [Auto (DHCP)] is selected, the value automatically acquired from the DHCP server will be entered in [IPv4 Address], [Subnet Mask] and [IPv4 Default Gateway Address].
|
|
