Search Results |
|
Error Codes - Beeping Flashing Lights BJC-210 / BJC-240 / BJC-250
Error Conditions RAM error 1 BLINKING BLINKING ROM error 2 BLINKING BLINKING Home position error 4 BLINKING BLINKING Waste ink full error 5 BLINKING BLINKING Temperature sensor error 6 BLINKING BLINKING Printing position correction error 8 BLINKING BLINKING Cleaning error 10 BLINKING BLINKING
|
|
|
BJC-80 Error Codes - Beeping Flashing Lights
10 ) temperature error : Occurs when the temperature sensor ITH 1) on the control board is defective. 11) Abnormal temperature rise error:
|
|
|
Error on computer: Warning The maximum number of computers that are monitoring to the device has been exceeded.
When the above error is displayed, 10 computers are currently registered to the device. Up to ten computers can be connected to the product (scanner) at once via a network. You cannot scan and send to an eleventh and subsequent computers.
|
|
|
BJC-4400 Error Codes - Beeping / Flashing Lights
Error Conditions correction 10 ) Print position error Occurs when the print position correction cannot be detected.
|
|
|
Error Codes and Their Solutions - BJC-6000
9 Beeps - Automatic print head alignment failed Either a BJ ink tank has run out, the print head nozzles are clogged or strong light has entered the paper output slot preventing the correct print head alignment. 10 (or more) Beeps - Service Error
|
|
|
A Support Code Is Displayed - MX722
See Also Support Code = 5B00, 5B 10 <Cause> Printer error has occurred.
|
|
|
A Support Code Is Displayed - MG7120
See Also Cause Support Code =5B00, 5B 10 Summary <Message>
|
|
|
An Error Message Is Displayed on the LCD - MG5420 / MG5422
See Also Cause Support Code = 5B00, 5B 10 < Message > Printer error has occurred.
|
|
|
Error LCD: System Error E+number - D480 - MF4350 - MF4370
If you encounter an E error code , turn the device off and disconnect for approximately 10 minutes. Reconnect the power and power on, if the error returns the machine will need to be repaired.
|
|
|
If Service Error E733-#### is displayed
If Service Error E733-#### is displayed 1. Turn the printer OFF, wait for 10 seconds or longer, and then turn it ON again. If the message does not reappear, the printer is ready. Note:
|
|