| Search Results |
 |
Scanning an image with IS Scan - Windows
|
Scanning an Image Install the IS-12 or IS-22 Color Image Scanner Cartridge in the appropriate printer. Make sure Canon IS Scan 2 is set as the Acquire Source and then select the command used for scanning (such as Acquire
|
|
|
Calibrate the Scanner from a Mac - MX922
|
If scanned images have incorrect colors , calibrating the scanner may help resolve the problem.
|
|
|
Send a fax with non-default image resolution or contrast settings - MX922
|
Steps to change the TX image quality settings Photo - Suitable for photographs. Note: When sending a color fax , documents are always scanned in the same resolution (200 x 200 dpi). The image quality (compression rate) is determined by which scan resolution is selected, except that Extra fine and Photo provide the same image quality.
|
|
|
Change the fax settings - MX310
|
TX TERMINAL ID TTI POSITION: Selects the position of the sender information (outside or inside the image area) when sending black & white faxes (Automatically set inside the image area for color faxes ). FAX/TEL NO. MARK:
|
|
|
Change the fax settings (MP530)
|
FAX SETTINGS Prints sender information at the top of each fax you send (The ON/OFF setting may be available depending on the county of purchase). TTI POSITION: Selects the position of the sender information (outside or inside the image area) when sending black & white faxes (Automatically set inside the image area for color faxes ). FAX/TEL NO. MARK: Selects the mark to appear before the fax/telephone number printed on faxes you send.
|
|
|
Use the white calibration sheet - IS-12 Scanner cartridge - BJC-85
|
Using the White Calibration Sheet When cleaning the white calibration sheet, use a soft cloth that is dipped in a weak, neutral detergent solution, and then wipe its wet surface off with a dry, soft cloth. The white level calibration data is stored into memory and used for maintaining the correct color balance of scanned images . When a message appears and prompts you to load the white calibration sheet, click the 'OK' button and perform white level calibration.
|
|
|
Scanner specifications MX850
|
Scanner Element CIS (Contact Image Sensor) Color Scanning Resolution
|
|
|
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
|
Reading Tone Curves With ScanGear, scanning images via a scanner is the input, and displaying to a monitor is the output. "Tone Curve" shows the balance of tone input and output for each Channel.
|
|
|
Facsimile (Fax) specifications MX870
|
MX870 Facsimile (Fax) Specifications Approx. 1 minute per page at 33.6 kbps, ECM-JPEG, transmitting from memory ( Canon color fax test sheet) Scanned image processing
|
|
|
Power the unit OFF then ON to automatically Calibrate the scanner
|
Calibrating the Scanner Calibrate the scanner to reproduce correct color tones in scanned images . Calibration may take time depending on your computer.
|
|
