| Search Results |
 |
Print using Airprint on a mobile device - imageCLASS products
|
For [Double-Sided], tap slide the bar to the right to enable double-sided printing or left to disable it. (Duplex models only)
|
|
|
Wireless LAN Troubles
|
... MF/LBP Wireless Setup Assistant, ... ... by Selecting a Wireless Router" in ... Check the SSID of the wireless LAN router or access point using Canon MF/LBP Wireless Setup Assistant, and repeat the setup again. ... "Setting Up Connection by Selecting a Wireless Router" in [ Setting the Wireless LAN Manually ... Check the SSID of the wireless LAN router or access point using Canon MF/LBP Wireless Setup Assistant. ... * To connect without disabling the stealth function, enter the settings manually. ... * To connect without disabling Deny ANY, enter the settings manually.
|
|
|
Error on mobile device "No AirPrint Printers Found"
|
Tap on [Settings] on your Apple Device Tap on Wi-Fi Tap on the network name with the blue check on the left.
|
|
|
Wireless Terms and Definitions (Video)
|
Most, but not all routers are wireless. Typically, an Access Point will have wireless capabilities. When it does, it will allow wireless communication devices to connect to a wireless network using various standards, like Wi-Fi .
|
|
|
Wireless Setup for the imageCLASS D1520, D1550, MF414dw, MF416dw, and MF419dw - Selecting a Wireless Router (Macintosh)
|
WPA-PSK or WPA2-PSK 9. Tap <Yes>. 10. Check that the Wi-Fi indicator is blinking on the operation panel.
|
|
|
Mobile Printing Compatibility Chart for imageCLASS products
|
|
Setting the Wireless LAN Using WPS
|
8. Check that the Wi-Fi indicator is blinking on the operation panel.
|
|
|
Setting the Wireless LAN Using WPS (D1550)
|
8. Check that the Wi-Fi indicator is blinking on the operation panel.
|
|
|
Checking the Available Connection Methods for the Wireless LAN
|
Wireless routers (or access points) connect the machine to a computer via radio waves. If your wireless router is equipped with Wi-Fi Protected Setup (WPS), configuring your network is automatic and easy. If your networking devices do not support automatic configuration, or if you want to specify authentication and encryption settings in detail, you need to manually set up the connection.
|
|
