| Search Results |
 |
User's Guide
|
2 Make Sure That the Error Indicator Is Off
|
|
 |
"You do not have the required privileges to access the specified folder" Appears When Scanning - MF Scan Utility (Windows) Error 9, 244, 3 or 9, 244, 2
|
MF Scan Utility Error 9, 244, 3 or 9, 244, 2
|
|
|
MF Scan Utility Error Messages - imageCLASS products
|
The error codes follow the folowing format. 9,###,#. e.g. 9,230,0 or 9,244, 2
|
|
|
Specifying Paper Size and Type
|
If the setting does not match the size and type of loaded paper, a paper jam or printing error may occur. ... 2 . Use ... 2 . Select <Select Frequently Used Paper Sizes>, and press ... 2 . Use ... 4- 2 . Specify the length of the < Y > (longer) side.
|
|
|
Setting the Wireless LAN Manually
|
2 . Use ... WPA/WPA 2 encryption method is ... ... WPA/WPA 2 encryption, you ... 2 . Use ... , see [ Error Messages About Wireless LAN ... ... PSK or WPA 2 -PSK If an error message is displayed during ... ... , and approximately 2 seconds later, ... Wait approximately 2 minutes until the ... 2 . Use ... experiences an authentication error if the shared ... ... PSK or WPA 2 -PSK ... WPA/WPA 2 -PSK> ... ... -B- 2 . If an error message is displayed during ... ... , and approximately 2 seconds later, ... Wait approximately 2 minutes until the IP address settings of the machine are completed.
|
|
|
Setting the Wireless LAN Using WPS
|
2 . Use 2 . Use ... be pressed within 2 minutes after pressing ... the button for 2 seconds or longer ... If an error message is displayed during ... ... , and approximately 2 seconds later, ... Wait approximately 2 minutes until the IP address settings of the machine are completed. ... 2 . Press ... If an error message is displayed during setup ... When the setup is completed, the screen below is displayed, and approximately 2 seconds later, the Wi-Fi indicator lights up. ... Wait approximately 2 minutes until the IP address settings of the machine are completed.
|
|
|
The Processing/Data Indicator Remains Lighting Up or Blinking
|
The Processing/Data indicator lights when any job is being processed. If the Processing/Data indicator remains lighting up or blinking, and the Error indicator is also blinking with an error message on the display, check the following.
|
|
|
Paper Handling
|
Maximum size: 8 1/ 2 " x 14" (216 x 356 mm) Minimum size: 5 7/8" x 4 1/8" (148 x 105 mm) Weight 13.3 to 27.9 lb Bond (50 to 105 g/ã¡) Paper Capacity 1 sheet Up to 35 sheets (Letter, 21.3 lb Bond [80 g/ã¡])
|
|
|
2-Sided Copying (MF244dw)
|
Solution You can copy two pages of a document on both sides of the paper. NOTE
|
|
|
Setting IP Addresses
|
Connecting the machine to a network requires a unique network IP address. Two versions of IP addresses are available: IPv4 and IPv6. Configure these settings depending on the network environment.
|
|
